MivaTek IPC2202 WiFi Home Camera User Manual
Names of Parts Mode Button LED Indicator Lens microSD Card Slot Stand Speaker Reset Button Micro USB Port English | 1
Getting Started Mobile device connects to smart WiFi Home Camera directly via App [Unieye Home] for remote control, live view, Widget display and receives push alerts when events are detected. For initial use, mobile device needs to: 1. Connects to internet (via WiFi, 3G/4G). 2. Download and install App [Unieye Home] from Google Play Store or Apple App Store. Unieye Home Camera needs to: 1. Insert a microSD Card (suggested class 10, up to 64GB). 2.
Wireless & App Operation Run App [Unieye Home] on mobile device and navigate either one of modes: (I) Internet Mode - Internet (II) Local Mode - Direct control Unieye Home Internet Mode (I) Local Mode 【Internet Mode】 Mobile device connects to camera via internet for remote control, live view, pan angel change, camera setup, push notification, Widget display and the instant live view from partner's camera.
【Internet Mode】 Before using 【Internet Mode】 on mobile App, ensure WiFi on mobile device is on and network indicator on camera shows steady purple. Mobile Device Connects to Camera 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camera name. 2. Run [Unieye Home]. 3. Tap【Local】and select the camera to enter View Page. Tap [ ] to scan again if camera is not found. Note: For first use, password setting is required.
Remote Control: Items Descriptions Talk to camera from mobile. Mute the sound from camera. Shoot videos or take photos and save to storage on mobile "Album\Unieye Home\“ Advance Setup: Items Descriptions Items Descriptions Rescan for cameras Delete camera Switch to local mode Tip for help Add camera About Camera Internet Setup Before using internet cloud service, Email and AP must be properly set up. 1. Go to [ Setup] [ Internet Settings] Edit Email and AP 2.
Cloud Video Recording Cloud Video Recording (CVR) saves videos and images in your cloud account. For initial use, cloud account should be authenticated. 1. Go to [Setup] Turn on [Save to CVR] 2. Select a cloud account and enter account information. 3. Tap Save on [Setup] page to activate CVR function. Widget displays on mobile desktop Widget is a small tool for Android devices that real tim shows alert inforamtion on Mobile desktop. 1. Add an Unieye Home Widget. 2.
【Local Mode】 Tap [ ] and select [Local Mode] to switch to Local Mode . Local Mode Main Page Remote Control Page Events (for camera) Items Camera Videos Descriptions View or delete recorded video files saved in camera SD card during motion and noise detection. Setup (for camera) In [Setup] Page, tap [Save] to complete settings to camera. Groups Descriptions Camera Settings Edit name, password. Format SD card. Adjust night vision, noise detection, motion detection, image rotation, etc.
Camera Hotkey Camera Hotkey Forced Shutdown Press and hold Forced Factory Settings for 5 seconds to turn off camera. • Camera: Open the top cover. Insert a small thin paper clip into the hole and press lightly to reset. Connect • Mobile: Go to App [Unieye Home] [Setup] page Reset 【Local Mode】 factory settings. Camera Indication Condition Status Indicator Beep Flash for few seconds, then turn to steady purple.
Troubleshooting Situation Cause/Solution Unplug power adapter, then plug again to Camera cannot turn on power on. Camera is frozen Unplug power adapter, then plug again to power on.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
