MIUFLY Body Camera User Guide Supporting Website: www.miuflybodycamera.
TABLE OF CONTENTS 1. Introduction Product Overview Box contents 2. Technical Specifications 3. Features 4. Main Manu Optional Detail 5. Operation 6.
1. Introduction Product Overview MIUFLY EH15 Body Camera is ruggedly designed to provides law enforcement, security and emergency personnel with super Full HD 1296p video recording capabilities, and one-button recording and activation. When worn on the front of clothing, an ultra-wide 140 ° field-of-view lens captures what happens in the field as accurate information for further analysis.
2.
3.
5
Item Description 1.Camera Lens High Definition Camera 2. Power Button 3.IR/White Light button 4.Infrared LEDs 5.Light Sensor 7.Speaker 8. Indicator LED 9.10.11. Status Indicator LED PLAY & UP KEY CONFIRM KEY MEMU & DOWN KEY ADD IMPORTANT FILE a). Press Hold for 3 seconds to turn on/off camera b). Press to enter or exit screen saver when camera is on a). Press to turn IR light on/off; b). Hold to turn on/off white light Records clear image in low light situation.
ONE PRESS AUDIO RECORDING & CHANGE RESOLUTION ONE PRESS PHOTO SHOT ONE PRESS VIDEO RECORDING USB PORT HDMI PORT CHARGING BASE PORT a). Press to record audio when not in video-recording mode b). Press to mute/unmute video when camera is on video recording c). Hold to change resolution between 480P and 720P a). Press to take pictures in standby mode b). Press to take a single snapshot image while in video recording a). Press to start/stop recording b).
Record Status Red blinking record status icon indicates camera is recording, white solid is standby mode.
4. Main Menu Optional Detail To enter the setting menu: 1. 2. Press Menu ( ) button and then enter a password. Enter the password by using the following commands: Press Scroll Up ( ) button to change the character to the previous letter or number. Press Menu ( ) button to change the character to the next letter or number. Press OK ( ) button to move to the next character PS: The default password is 000000. 3. After selecting the last character, press OK ( setting menu.
Setting Description Options Resolution The image resolution for video Megapixels The image resolution for photos Burst Self Timer Continuous shooting Quality Pre-record The number of images captured when you take a photo. The amount of time the camera waits to take a photo after you press Snapshot button. When on, pressing the snapshot button will activate continuous shooting during which the camera will automatically taking a picture at regular intervals.
Post Record Car DVR Mode Loop Recording Split Time Slides Show Infrared White Led Motion Detect Recording warning GPS Time Zone Language Screen Saver Auto Power off LED Light The amount of the time the camera waits to stop recording video after you press the Record button. When on, camera will power up automatically and start video recording when it is charged. Camera will power off as it normally does when it is disconnected from the power source.
Key Tone Volume ID setting Change Password Time Setup Default setting When on, camera will play a tone each time you press a button. When off, tone is disabled. The volume of camera speaker. This affects the loudness of video playback, audio playback, the key tone, record warning, and any other sounds played by camera. This doesn't affect the volume of the recorded video or audio files themselves.
5. Operation 5.1 Power on/off 1) Power on: when camera is off, press and hold power ( ) button for 3 seconds, camera will power up and enter standby mode; Boot up image shows up; Working status LED indicator turns green; Boot up music; Camera vibrates; Camera voice “beeps” when [Record Warning] is ON.
Otherwise, when circumstance brightness grew up, IR LED turns off, and image becomes colorful again. 2) Manual infrared mode: When night vision is needed, PRESS IR light button to switch to Infrared mode, IR LEDs will be turned on, black and white image. PRESS this button again to turn off IR LEDs, image becomes colorful. 5.4 Take Photos In standby, PRESS snapshot ( ) button to take a snapshot, with a sound “Click”, LED working status indicator will flash green once, and the photo stored.
will start video recording again. 5.8 Audio Recording In standby mode, PRESS Audio ( ) button, with a beep and camera vibration, LED indicator turn yellow and flashes, audio recording started. PRESS Audio ( 5.9 ) button again to stop audio recording. One Button recording When camera is powered off, HOLD Record ( ) button, camera will initiate and start video recording immediately. 5.
5.13 USB Driver After being connected to PC, password interface shows up, please enter the password (default password is 000000), the camera will be recognized by the computer. 5.14 Playback 1) In playback mode, PRESS OK ( Scroll-Up ( ) to pause/resume playback; PRESS ) button to rewind, PRESS Scroll-down ( ) button to fast forward, then PRESS OK ( ) to play normally. You can fast forward or rewind 2x, 4x, 8x, 16x, 32x, 64x, 128x.
A USB port on your computer (powered on) The included USB power adapter (connect to a power outlet) The included car charger. 2). Attach camera to the docking bay. Use a USB cable to connect the docking bay to one of the following: A USB port on your computer (powered on) The included USB power adapter (connect to a power outlet) The included car charger. 5.
GPS Player Google Earth Run GPS player and Google Earth. Open the video (with GPS tags) footages by the GPS player.
PS: you could choose related maps in your region. Click “Google Earth” icon to review GPS route on Google Earth program. (PS: make sure Google Earth program is working in your PC.
GPS tags on Google Earth.
6. Troubleshooting 6.1 Cannot enter Menu of Body Camera A. Stop Recording prior to entering Body Camera’s menu by pressing Record button. A. Body Camera supports a six character alphanumerical password format. Prior to entering menu of Body Camera, ensure that correct password is entered. 6.2 IR are not turning on A. IR turn on automatically only if they’re set to Auto in the Infrared menu. Otherwise the Infrared will remain disabled. 6.3 Indicator LEDs are not lit A.