%ASY 3EARCH #ONTENTS 0RECAUTIONS -ANUAL FOR "EFORE 5SING THE (ANDSET 6OICE 6IDEOPHONE #ALLS 88 0USH4ALK 0HONEBOOK 3OUND 3CREEN ,IGHT 3ETTINGS 3ECURITY 3ETTINGS #AMERA I MODE I MOTION I #HANNEL -AIL I αPPLI /SAIFU +EITAI 4ORU#A 4 " $ '03 &UNCTION &ULL "ROWSER $ATA $ISPLAY %DIT -ANAGEMENT -USIC 0LAYBACK &- 2ADIO /THER #ONVENIENT &UNCTIONS #HARACTER %NTRY .
DoCoMo W-CDMA System Thank you for selecting the FOMA D905i. Carefully read this manual and other manuals delivered with devices such as the battery pack, before using your FOMA D905i, and consult the corresponding manuals while using the phone so that you are able to use it correctly and effectively. If you are unclear as to any point indicated in any of these manuals, contact the DoCoMo Information Center that is listed on the back of this manual. Your FOMA D905i is a valuable asset.
How to use and refer to this manual You can look for functions or operation procedures that you want to know using various searching ways. Search on Index P500 ▲ Search for a function name or service name. Use Easy Search See the next page for details. P4 ▲ Search for frequently-used or useful functions using easy-to-understand words. Use Front Cover Indexes See the next page for details. Front Cover Search by turning over the pages on this manual using the front cover indexes.
How to use and refer to this manual Shown below is an example when you search for the page where “My Picture” is described. Searching on Index Use the index if you have already known a function or service name. ▲ My Menu ................................ 197 My Picture .............................. 314 Deleting .............................. 349 Sort .................................... 350 Use albums......................... 346 N Bookmark/mark .... Deleting ............... Displaying ............
Shortcut operation ☛P32 ▲ Menu 51 Displaying images Sorting data My Picture You can display images saved in My Picture in Data Box of the FOMA terminal.
Easy Search Use this Easy Search to search for a function using easy-to-understand words. Useful functions for phone calls When unable to answer an incoming call x x x x Notify/not notify your phone number.................... 48 Caller ID Notification Put the current call on hold.................................. 53 On-hold Switch to videophone call during voice call ......... 55 Switch to videophone Adjust the volume of the other party’s voice........ 70 Listen Volume x Put the incoming call on hold..
Advanced functions for mail Advanced functions for camera Settings for your phone safety x Send your original Deco-mail ............................ 224 x Send images with mail....................................... 227 x Sort and save mail automatically....................... 250 Deco-mail Attachment Sort Method x x x x Change the size of image to shoot .................... 183 Image size x x x x x Keep your phonebook data secret.....................
Contents Before using your FOMA terminal ............. Inside front cover For first time user of the FOMA terminal ... Inside front cover How to use and refer to this manual....................................1 Easy Search ........................................................................4 Features and functions of FOMA D905i ..............................8 Making full use of D905i ....................................................10 SAFETY PRECAUTIONS (Always follow these directions)......
Contents i-αppli 263 i-αppli Downloading Starting i-αppli i-αppli Standby Display etc. Osaifu-Keitai/ToruCa 281 Osaifu-Keitai iC transfer service Starting Osaifu-Keitai compatible i-αppli ToruCa Obtaining ToruCa Displaying ToruCa IC Card Lock etc. GPS Function 293 GPS Position Location Navigation GPS-compatible i-αppli Location Request Notify Location etc.
Features and functions of FOMA D905i Consideration 8 Easy Search/Contents/Precautions
Consideration Easy Search/Contents/Precautions 9
Making full use of D905i A variety of functions of D905i visual communications are explained here.
Consideration Easy Search/Contents/Precautions 11
SAFETY PRECAUTIONS (Always follow these directions) ● Read the following SAFETY PRECAUTIONS to ensure that the phone is used correctly. Also, store this manual in a convenient location for future reference. ● It is essential that these precautions be observed to prevent injury to the user and third parties as well as damage to property. ● The following symbols are used to indicate the degree of danger or damage that may result from failing to follow the specified precautions.
Handling the FOMA terminal, battery pack, adapter (and charger) and the UIM (general information) DANGER Use only DoCoMo-certified battery packs and adapters (and chargers) with the FOMA terminal. Use of non-specified items could cause the FOMA terminal, battery pack and other devices to leak, overheat, rupture, catch fire or malfunction.
Do not store in locations subject to high temperature, humidity or excessive dust. Doing so could damage the equipment. Be especially careful when you use the FOMA terminal connected to an adapter (and charger) continuously for a prolonged period. The temperature of the FOMA terminal, battery pack or adapter (and charger) may become high when using i-αppli or videophone while charging for a long period of time.
If a metal strap is attached to the FOMA terminal, be careful not to hit a person or property with the strap during use of the Motion Control function. Use the FeliCa reader/writer function in Japan. Injury or damage to the phone could result. The FeliCa reader/writer function of the FOMA terminal is certified to be compliant with the Japanese radio communication standard. If you use this function overseas, you may be punished. Do not swing the FOMA terminal around by the strap.
WARNING Should any electrolyte from the battery pack come into contact with your skin or clothing, immediately stop using the battery and rinse with clean water thoroughly. Failure to do so could cause skin injuries. Stop charging if it is not possible to fully charge the battery pack within the specified time. Failure to do so could cause the battery pack to leak, overheat, rupture or catch fire.
During charging, place the adapter (and charger) and Desktop Holder in a stable location. Do not cover or wrap the adapter (and charger) and Desktop Holder with a cloth or blanket, etc. Using the equipment under such conditions could cause the FOMA terminal to be detached from the holder, or cause a heat buildup that leads to fire or equipment failure. Do not touch the FOMA terminal and the adapter (and charger) when hearing thunder.
Handling instructions General ● Do not get the components wet. The FOMA terminal, battery pack, adapter (and charger) and UIM are not waterproof. Avoid using the components in a bathroom or other high humidity areas or locations exposed to rain. If you carry the components, sweat could cause internal corrosion that leads to equipment failure. As a result of investigation, if component failure is found to be water-related, repair is not covered by the warranty and may not be able to be performed.
Adapter (and charger) ● Recharge the battery pack in a location where the ambient temperature is between 5 ° C and 35 ° C. ● Do not recharge in the following locations: • Locations that are subject to high humidity, dust or excessive vibration • Near general subscriber phones, TVs or radios ● It is normal for the adapter (and charger) to become warm during recharging. You can continue charging with a warm adapter. ● When the battery pack is recharged using the DC adapter, always keep the car engine running.
・ Powered by JBlendTM Copyright About intellectual property rights Copyrights and portrait rights Except in cases where reproduction and quoting for private use is sanctioned under copyright laws, the reproduction, alteration and public transmission of such content as text, images, music or software for which another party owns the copyrights, whether accomplished by using this product to photograph or record that content or by downloading it from Internet websites, is prohibited without the permission of
・ NetFront of ACCESS CO., LTD is installed in this product to provide Internet functionality. NetFront is a trademark or registered trademark of ACCESS CO., LTD. in Japan and other countries. Copyright© 1996-2007 ACCESS CO., LTD. ・ This product contains a module developed by the Independent JPEG Group. ・ FeliCa is a contactless IC card technology developed by Sony Corporation. FeliCa is a registered trademark of Sony Corporation. ・ This product is licensed based on MPEG-4 Visual Patent Portfolio License.
Basic package and optional accessories Basic package FOMA D905i (including the written warranty and the Back Cover D18) CD-ROM for FOMA D905i Instruction manual (this book) Man ual Quick Manual ☛P506 T.B.D The PDF version of “Manual for Data Communication” and “Kuten Code List” is contained.
Before Using the Handset Names and functions of parts .........................................................................24 Reading the display ..........................................................................................28 Selecting the menu ...........................................................................................31 Using the UIM (FOMA card) .............................................................................36 Attaching/removing the battery pack ..............
Names and functions of parts a b g h i c T.B.D d a b c j l m d e f g h i k n l m j k o p Size (mm): ★★★ (H) x ★★ (W) x ★★.★ (D) e f ・ For a to m in the above figure, see the description in “Function of keys”. ☛P25 a Infrared data port ☛350 Used to exchange data via infrared communication. b Earpiece The other party’s voice comes out of here. c In-camera ☛P83, P174 Used to shoot yourself and send your image during a videophone call.
Functions of keys You can perform the following operations by pressing keys. (●: press shortly, ■: hold down for over a second) a tSpeedMenu/Start videophone/Scroll/Lower left soft key ● Displays Speed Menu. ● Makes/answers videophone calls. ● Scrolls by screen while viewing a mail or site. ● Switches between upper/lower cases when entering characters. ● Performs the operation shown in the lower left of the guide row. ■ Displays Speed Menu (when calling by voice).
Opening/closing the FOMA terminal To open the FOMA terminal, slide the front face (with the display) upward. To close it, slide the front face downward. ・ Operations such as accessing the reply mail screen or the edit schedule or note screen are made easily by opening the FOMA terminal. ☛P386 ・ The FOMA terminal allows you to make calls without opening it. You can also answer an incoming call by opening the FOMA terminal, and end or put on hold the call by closing it. ☛P69, P70 Open Close T.B.
INFORMATION ● In the following cases, no operation is performed by rotating the Speed Selector but pressing % or & is enabled: ・ Displaying sites by shortcuts on the dial input screen ・ Moving the cursor, frame (for changing size or clipping) or stamp while editing still image ・ Using Calculator ・ The display is off Setting the Speed Selector Speed Selector Setting Set the rotating operation of the Speed Selector.
Reading the display The description of icons displayed at the top or the bottom of the display is shown below: : Unread SMS exists a-m / (blue/red) : Unread Message R exists/fills storage space*2 / (green/red) T.B.
u : *1 : v Reading the UIM ☛P44 IC Card Lock is set ☛P290 / / Effective Speed Selector keys in Focus Mode ☛P35 w : Alarm Clock is set ☛P387 : Schedule alarm is set ☛P390 : Alarm Clock and schedule alarm are set simultaneously x Status of USB Mode Setting and microSD memory card ☛P345 : The communication mode is set with microSD memory card inserted (navy blue/gray) The microSD mode is set with/without microSD memory card inserted / (navy blue/gray) : The MTP mode is set with/without microSD memory
: Melody : My Document (PDF Viewer) : Chara-den : Machi-chara : Kisekae tool : Others (Document Viewer) : Still Camera : Movie Camera : Sound Recorder : Bar Code Reader : Music Player : Setting FM Transmitter using Multitask : GPS Position Location : GPS Location Request : GPS Notify Location : GPS Location Log : Timer : Setting Alarm Clock/alarm clock sounding : Scheduler : Schedule alarm sounding : Notepad : Calculator : Dictionaries : Data exchanging through external device / (dark blue/gray) : Accessin
Selecting the menu There are three types of the menu: normal menu, custom menu and Speed Menu. The normal menu is a standard menu that appears when you press m. The custom menu is your original menu created by adding menu items. Speed Menu can be displayed by pressing t. You can start 5 functions from Speed Menu. Hold down for over a second p Speed Menu Speed Menu*1 (when calling by voice) Normal menu Custom menu*3 Rotate*2 *1 Can only be displayed in the Japanese display.
Selecting menu items Select menu items by the dial keys (Shortcut operations). Also, use the Speed Selector to select menu items. ・ In this manual, the operation procedure is explained mainly in shortcut operations using the normal menu (except simple menu). ・ When any lock function is set or the UIM is not inserted, some functions are disabled. The disabled functions are indicated by or their menus are dimmed.
Selecting menu items with the Speed Selector Example 1 Executing Phonebook new entry from the normal menu (Type5 of animation menu) m z Highlight Phonebook & Logs z o ・ To return to the previous screen: c ・ To return to the standby display: f ・ In case of the animation menu, the operations of O differ depending on the animation design. ・ Highlighting the desired menu item in other than the animation menu shows the description of the item’s function.
Selecting items on the screen Selecting an item from the pulldown menu an item z o to display the pulldown menu z % to highlight an item z 1 Highlight o ・ You can select an item by the dial key for the item number. Pulldown menu Selecting an item from the check box 1 Highlight a check box z o The check box changes from to , and is selected. ・ Select the selected item to cancel the selection. The check box changes from to . ・ Depending on the function, you can select/cancel all items by pressing m.
Displaying information quickly When the focus mode icons such as display the information. 1 o z Highlight an icon such as Focus Mode or are displayed on the standby display, you can quickly or zo The screen corresponding to the selected icon appears. Missed call exists: The received call list appears, letting you check the date and time, the caller information, etc. Unplayed recorded message exists: The recorded message list appears, letting you play the recorded messages.
Using the UIM (FOMA card) The UIM (FOMA card) is a card in which your phone number and other information are recorded. Insert the UIM into the FOMA terminal to use it. ・ For details on handling the UIM, refer to the UIM manual. Inserting/removing the UIM Use your FOMA terminal with the UIM inserted. If the UIM is not inserted in your FOMA terminal, first insert it. ・ Turn the power off before inserting or removing the UIM. ・ Insert or remove the UIM with the FOMA terminal closed using both hands.
UIM security codes The PIN1 and PIN2 codes are used for the UIM. Both codes are set to “0000” at the time of subscription to the FOMA service. You can change this to any code (4 to 8 digits). ☛P156 UIM operation restriction function The FOMA terminal is provided with the UIM operation restriction function for protecting your data and files.
Functional differences between the UIM types Note the following functional differences between the UIM (blue) and the UIM (green/white) when used in the FOMA terminal: Item UIM (blue) UIM (green/white) Page Number of digits of a phone number that can be Up to 20 digits registered in the UIM phonebook Up to 26 digits P104 Certificate Download for using FirstPass Unavailable Available P212 WORLD WING service Unavailable Available P38 Service Dialing Number Unavailable Available P426 WORLD W
Attaching/removing the battery pack ・ Turn the power off before attaching or removing the battery pack. Also, attach or remove it with the FOMA terminal closed using both hands. ・ Be careful not to touch the camera lens. ・ Use the specified Battery Pack D07. Attaching the battery pack Press here. T.B.D aRemove the back cover. While pressing the top of the back cover with your thumb, slide it in the direction of the arrow until it is removed.
Charging the FOMA terminal When the battery level is low, charge the battery. ・ The battery level icon shows how much charge remains in the battery. ☛P43 Battery pack life ■ The battery pack is a consumable part Each time it is charged, it will accept slightly less charge than the previous time. ■ When the battery charge lasts only half as long as when it was new The end of battery pack life is approaching. Replace it with a new one immediately.
■ Precautions ・ If you talk on the phone or use communication, i-mode or i-αppli for a long time while charging the battery, charging will take longer. The battery may not be charged temporarily by temperature rise. This may also shorten the battery pack life. ・ Insert or remove the connector straight to/from the FOMA terminal. ・ Insert or remove the connector to/from the FOMA terminal slowly and firmly without forcing it.
How to charge Use the FOMA AC Adapter 01/02 (optional) to charge the battery. It can also be used with the Desktop Holder D13 (optional). ・ The battery pack can only be charged when it is attached to the FOMA terminal. ・ For details, refer to the manuals for the AC adapter and the Desktop Holder. ■ Charging the battery with the AC adapter alone You can charge the battery with the FOMA terminal either closed or open. 100 V AC outlet Power plug Connector ( up) Enter key T.B.
Charging in a car Use the FOMA DC Adapter 01/02 (optional) to charge the battery in a car. It can be used in negative ground cars (both 12 V and 24 V). ・ For details, refer to the DC adapter manual. aInsert the cigarette lighter plug of the DC adapter into the cigarette lighter socket of the car. bTurn off the power of the FOMA terminal and open the external connection terminal cap. cInsert the DC adapter connector firmly until it clicks. dCheck that charging starts. Check that the Enter key lights in red.
When the battery almost runs down A message indicating low battery appears. The message disappears by pressing o, c or f, but after a period of time, it reappears and the low battery alert sounds. At this time, all the icons on the top of the screen blink and after about 1 minute, the power turns off automatically. Charging the battery stops the low battery alert. To stop it immediately, press f. ・ During a call, the low battery alert sounds from the earpiece and the message appears.
INFORMATION ● When you turn on the FOMA terminal after replacing the UIM (except when Omakase Lock (Remote Lock) is set), entry of the 4 to 8-digit terminal security code is required. After entering the correct terminal security code, the standby display appears. If a wrong terminal security code is entered 5 times consecutively, the power is turned off ( but can be turned on again). ● When you turn on the FOMA terminal, the PIN1/PIN2 code entry screen appears depending on the setting (☛P155, P402).
Changing initial settings from the standby display 1 m8799 ・ The subsequent steps are the same as when setting upon turning the power on for the first time. INFORMATION ● When you turn the power on during All Lock or Keypad Dial Lock or when the power is turned on by Auto Power ON, the initial setting screen does not appear. ● The settings of this function are reflected to each function settings.
・ The entered number can also be increased or decreased with %. You can also reenter the number after highlighting it with &. When the automatic time correction is set The automatic time correction takes place when the UIM is inserted and you turn the power on in a location where radio waves reach. ・ The automatic time correction sometimes causes a time error of several seconds. In addition, it may fail to correct the time depending on the radio wave condition.
Notifying your phone number to the other party Caller ID Notification Set the FOMA terminal to send your phone number (caller ID) to be displayed on the other party’s phone every time you make a call. ・ The caller ID is your important information. Carefully consider whether to send your caller ID. ・ The caller ID is displayed only when the other party’s phone can display the caller ID. ・ For details, see “Mobile Phone User’s Guide [Network Services]”.
Voice/Videophone Calls Making voice/videophone calls Videophone .......................................................................................................50 Making voice/videophone calls .......................................................................51 Transmitting tone signals (DTMF) ............................................. Send DTMF 54 Switching between a voice call and videophone call ....................................55 Using Redial/Received Calls ............................
Videophone The videophone function is available between terminals that support DoCoMo’s videophone. By using the videophone, you can talk on the phone while looking each other’s images. It is also possible to display a still image, substitute image, Chara-den, etc. instead of your self image. ・ Chara-den ☛P328 ・ Videophone communicates at only 64 kbps. DoCoMo videophone specifications are compliant with “3G-324M*1 that has been standardized by the international standard 3GPP*2”.
Making voice/videophone calls 1 Enter the phone number ・ When calling general subscriber phones, always include the area code, even from the same city. ・ Up to 80 digits can be entered. However, only 24 digits are displayed. ・ To correct the phone number: c ・ To return to the standby display: c (for over a second) 2 n (voice call) or t (videophone call) You will hear a dial tone. You can start talking when the call is answered.
INFORMATION [Common] ● If you hear a guidance requesting your caller ID when making a call, call again after setting the FOMA terminal to send caller ID. ☛P48 ● When you have subscribed to the Multi Number service, you can call after selecting a registered multi-number. ☛P428 ● In the dual mode of 2in1, a screen appears prompting you to select the number from which you are calling. Select Number A or Number B. [Voice call] ● You can also make a voice call in order of Step 2, Step 1.
Putting calls on hold while talking On-hold Putting the call on hold while talking allows you to talk without the other party hearing your voice. Callers are charged for the time spent on hold. 1 o during a call The call is put on hold and a guidance (on-hold tone) is played. For videophone calls, the onhold image appears on the other party’s terminal. Flashes On-hold image Voice call on hold Videophone call on hold ・ Press o or n while a voice call is on hold to cancel the hold.
Transmitting tone signals (DTMF) ・ You can input tone signals (DTMF) during a videophone call while sending your self image ( camera-off image ( Example 1 ) or Chara-den ( Send DTMF ), the ). During a videophone call m9 during a videophone call z Enter with dial keys The entered number appears on the screen and the tone signals (DTMF) are transmitted.
INFORMATION ● Tone signals (DTMF) may not be received depending on the receiving device. ● You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed pause (T). Switching between a voice call and videophone call You can switch between a voice call and a videophone call by operating from the submenu during a call when the other party’s terminal can switch calls. Switching can be performed only from the terminal that made the call.
Menu 46 / Menu 45 Using Redial/Received Calls Redial/Received Calls The FOMA terminal records voice calls, videophone calls and PushTalk calls that you made in Redial and those you received in Received Calls. With Received Calls, you can also check unanswered calls (missed calls) and recorded messages. ・ Up to 30 calls are recorded in Redial and Received Calls, respectively. When the number exceeds 30, calls are deleted staring with the oldest one.
■ Registering a group in the PushTalk phonebook: Highlight a call z m44 z Enter a group name z p The parties of a PushTalk call with multiple parties can be registered as a group if registered in the PushTalk phonebook. ■ Deleting redials/received calls: ・ You cannot delete multiple calls at once on the details screen.
Reading the redial/received call list screen Example For Redial c a d e f g h b i List screen a Date and time Calling/receiving date and time (the local date and time during stay overseas) b Icon Icon registered in the phonebook*1 ・ c International call d Call made/ received by 2in1 numbers*3 e Ringing time*4 f Call type c f g d a h j e i b k l Details screen g Caller ID notification*5 Call status (with Chaku-moji/ without Chakumoji) appears (list screen only) when a PushTalk call was mad
*7 The first member’s name is displayed when you made a PushTalk call to multiple parties without using group calling. *8 Displayed when registered in the phonebook, according to the setting of View Preference. *9 For redial, displayed for a call made using Call Option. Setting Chaku-moji Chaku-moji When you make a voice or videophone call, you can set a message (Chaku-moji) to be displayed on the incoming screen of the other party’s terminal.
Making the Chaku-moji reception setting Default Message Display Setting Only with Caller ID 1 m8732 z 1 - 4 Display all :Displays all Chaku-moji. Hide all :Hides Chaku-moji. Only from stored No.:Displays Chaku-moji only from a party registered in the phonebook. Only with Caller ID :Displays Chaku-moji only from a party with the caller ID. Making a call by attaching Chaku-moji ・ Up to 10 messages can be recorded in the history of sent messages.
Showing/hiding your caller ID for each call 186/184 Call Prefix a specific number to the beginning of the phone number when you make a call. ・ The caller ID is your important information. Carefully consider whether to send your caller ID. ・ The caller ID is displayed only when the other party’s phone can display caller ID.
Intn’l prefix :Select the international access code set in Int’l Call Assist. Country code:Select the country code set in Int’l Call Assist. 3m A call is made by the settings. ・ When you select V.phone in Call type, press t to select Chara-den to be displayed during a videophone call. ・ When you have set Intn’l call to ON, press m and select Yes. Press m and select No, use original to cancel other settings than the setting of Chaku-moji and call type and make a call.
Setting for international calls Int’l Call Assist You can set whether to make an international call by replacing “+” which was entered at the beginning of a phone number with the international access code set in this setting, and whether to make a call from overseas by adding the country code. Default Country code: ON (Country code: 81, Country name: 日本(Japan)) Intn’l prefix: ON (Name: World Call, Intn’l prefix No.
Using “+” to make an international call When you enter “+” at the beginning of a phone number for dialing, a confirmation screen appears asking whether to replace “+” with the international access code according to Int’l Call Assist. ・ This operation is valid when Intn’l prefix of Int’l Call Assist is set to ON. (for over a second) z Enter the country code z area code (city code) z phone 10 number z n ・ Hold down 0 for over a second to enter “+”.
Making a call by specifying a sub-address 1 Enter the phone number z ( z Enter the sub-address ・ You can also enter “ ” at the beginning of the phone number to connect to V-live or other numbers. 2 n (voice call) or t (videophone call) ・ The sub-address needs to be set on the other party’s phone or communication device.
Talking without using hands in a car In-car Handsfree You can make and receive voice calls from a handsfree compatible device by connecting the FOMA terminal via USB to such device as the In-Car Hands-Free Kit 01 (optional) or car navigation system. ・ For operations of handsfree devices, refer to the instruction manual for each handsfree device. Note that the FOMA In-Car Hands-Free Cable 01 (optional) is required to use the In-Car Hands-Free Kit 01 (optional).
Display information The caller’s information such as phone number, name, image and video/i-motion will be displayed on the screen according to the dialing condition of the caller and your FOMA terminal settings. You can set the FOMA terminal not to display the name or phone number. ☛P164 ■ When the caller has notified caller ID If the caller’s phone number is not registered in your phonebook, the phone number is displayed. Also, the image set in Call Alert, Videophone Alert or other settings is displayed.
When you hear beeps (call waiting ring tone) during a voice call If Voice Mail Service, Call Waiting Service or Call Forwarding Service is subscribed, you will hear beeps (call waiting ring tone) when you receive another incoming voice call during a voice call and the following operations can be performed: Service Operation Voice Mail Service*1 Connects the second call to the Voice Mail Service Center. Call Waiting Service Puts the current call on hold and answers the second call.
2 Yes The call is switched to a videophone call and your self image is sent to the other party. ・ To send the substitute image (camera-off image): No ・ When you select Yes, your self image is sent for the first time. ■ Switching a received videophone call to a voice call: Receive the request of switching to a voice call during a videophone call The videophone call is switched to a voice call automatically. ・ A guidance informing that the call is being switched is played during switching.
Setting to disconnect/continue/hold a call by closing the FOMA terminal Close Setting ・ This function does not operate during 64K data communication or packet communication. ・ You can end a PushTalk call by closing the FOMA terminal. Use PushTalk Close Setting to set it. Default Continue 1 m8572 z 1 - 3 End the call: Ends the call. Continue :Continues the call. On hold :Puts the call on hold. The other party hears a guidance (on-hold tone).
Adjusting the volume of ring alerts while receiving a call Ring Alert Volume ・ The volume can be adjusted in 7 levels, from silent to level 1 to level 6 (the volume of Movie ringtone can also be adjusted in 7 levels). ・ The ring volume changed while receiving a call is reset to the original volume when a call or PushTalk is ended. Default Level 4 1 % while receiving a call z O to adjust the volume The volume is set automatically by pressing o or waiting for a while after you stop key operations.
Putting incoming calls on hold when you cannot answer right away Response and Hold ・ Callers are charged for the time spent on hold. 1 f while receiving a call Incoming voice call on hold The incoming call is put on hold (Response and Hold). The other party hears the response hold guidance. For videophone calls, the response hold image appears on your and the other party’s terminals. ・ If f is pressed or the other party hangs up during Response and Hold, the call is disconnected.
Setting the response hold guidance Status Message You can record your own voice as response hold guidance. ・ One guidance of up to about 10 seconds long can be recorded. ・ While a voice call or videophone call is during Response and Hold, the guidance set by this function is played.
Using Public mode (Driving mode) Public mode (Driving mode) Public mode is an automatic answering service considering etiquette in highly public places. When Public mode is activated and a call is received, a guidance is played and informs the caller that the called party is driving or in an area (train, bus, movie theater, etc.) where use of the phone should be refrained and cannot answer the call. Then the call is disconnected.
INFORMATION ● In Public mode, the following sounds are disabled. In addition, the vibrator does not operate or the Enter key does not light or flash for incoming calls and mails, etc. ・ Ring alert ・ Alarm clock ・ Schedule alarm ・ Timer alarm ・ i-αppli sound ・ Charge alert ・ Low battery alert ・ GPS alert ・ Alarm for Call Cost Limit (Even if Alert for Call Cost Limit is set to ON and an alarm is set, a message is not displayed.
■ Operation when receiving calls in Public mode (power off) with network service activated Service Receiving voice calls Receiving videophone calls Voice Mail Service The caller hears the Public mode (power off) guidance and the call is then connected to the Voice Mail Service Center.*1 The call is connected to the Voice Mail Service Center without the Public mode (power off) video guidance.
Replying with Quick Record Message When Answer Machine has not been set to start, you can activate this function only once by holding down C for over a second while receiving a call. This operation does not set Answer Machine to start. INFORMATION ● When the number of recorded messages reaches 4, is indicated on the standby display. The icon does not disappear even if Answer Machine is canceled. ● If there are already 4 recorded messages, Answer Machine cannot be set.
Menu 4713 Setting the response time until the greeting starts Default Response Time Setting 13 Sec. 1 C13 z Enter the response time (0 to 120 seconds) ・ To increase or decrease the time: % INFORMATION ● When Auto Answer, Voice Mail Service or Call Forwarding Service and this function are set simultaneously, the priority depends on the ringing time set for each service and function.
Menu 472 Playing recorded messages You can play or delete recorded messages from the list. ・ Unplayed recorded messages, if any, can be played quickly from the standby display. ☛P35 1 C2 e a On the recorded message list screen, the recording date and time and the caller’s phone number appear.
Using Chara-den A character can be sent instead of your image when making a videophone call. 1 m321 during a call z Select a folder z Select a Chara-den image ・ If you press dial keys while sending Chara-den as the substitute image, the character performs the action corresponding to the key pressed. The following operations can also be performed: 0:Cancel action (:Display the action list ・ Selecting an action moves the character.
Setting the quality of outgoing and incoming images ・ Setting Prefer motion spd makes motions smoother in a little lower-definition image. ・ Setting Prefer img qual makes motions a little slower in a higher-definition image. Default Normal 1 m7 during a call z 1 or 2 z 1 - 3 Setting a frame on the outgoing images Frame The frame can be set while sending your self image. ・ Only the frame with the display size of 176 x 144 or smaller can be selected.
Adjusting the brightness/color density/flicker of outgoing images Camera Setting You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of images, if it occurs, by making settings according to the power supply frequency in your area. ・ This setting is available only while your self image is being sent. ・ The brightness and color density may not be changed depending on the settings of Screen Mode/Effect.
Switching display magnifications Zoom ・ This setting is available only while your self image is being sent. Default normal ( ) 1 & during a call ・ Each press of r switches the magnification of image as follows. Press l to switch in the reverse order. In-camera : normal ( Out-camera: normal ( → 10x ( ) → 2x ( ) ) → 2x ( ) → 4x ( ) → 6x ( ) → 12x ( ) → 16x ( ) ) → 8x ( ) INFORMATION ● Zooming will be canceled if you switch between the in-camera and out-camera.
Turning the compact light on ・ You can switch the compact light on only while the out-camera is used. ・ The compact light may go out temporarily when you perform some setting operations while talking. 1 m5 during a call The compact light is turned on. If the light has been turned on, it goes out. ・ Each press turns the compact light on ( ) and off (no icon). Customizing the screen settings during a videophone call ・ The settings are retained even after the call is finished.
Changing the videophone settings Videophone Settings Set the operation to be performed when a videophone call is not connected, the screen displayed during a videophone call, etc. ・ The setting of Auto redial as voice is provided to ensure access to the other party.
Menu 8234 Setting the substitute and on-hold images to be displayed during a videophone call Videophone Image Setting Change the images to be sent to the other party during a videophone call such as the substitute image, answer machine image, response hold image, on-hold image and video memo image.
INFORMATION ● If the Chara-den set as the substitute image is deleted, the substitute image is reset to Default Chara-den. If you delete the still image or the default Chara-den that has been set, the substitute image is reset to Default image. Setting of switching between a voice call and videophone call Notify Switchable Mode Set whether to notify the other party’s terminal that your terminal can switch between a voice call and a videophone call.
Using the videophone by connecting to an external device External Device By connecting the FOMA terminal to an external device such as PC by the FOMA USB Cable (optional), you can make and receive videophone calls from the external device. To use this function, install a videophone application in a dedicated external device or a PC, and prepare devices such as an earphone/microphone or USB-compatible Web camera (available in market).
Using the infrared remote control function Setting operations for data transfer The FOMA terminal can be used as an infrared remote controller by downloading the i-αppli for infrared remote control. Set operations for data transfer by infrared communication, iC communication and USB connection. ・ Download the i-αppli suited for the individual device.
・ The type of data that can be sent or received is ● In the ToruCa list, press m and select iC transmission. the same as with infrared communication. ☛P351, P352 ・ Data prohibited from outputting from the FOMA terminal cannot be sent/received. Note that this excludes both the data whose file restriction is set to File restricted with your terminal and the data in the Data transfer folder.
INFORMATION Using iC communication to receive data ● It may take time to receive a large capacity of data or a large number of data items. ・ Data cannot be received while executing other functions. Return to standby display and receive data. ・ For precautions of saving data, see INFORMATION in “Saving received data”. ☛P354 Receiving one data item ・ You cannot receive data that exceed 512 Kbytes.
・ FM Transmitter cannot be used with FMラ Listening to music on an audio device or FM Transmitter car stereo This function transmits the music or sound from Music Player or i-αppli via FM radio waves. You can listen to it on your home or car stereo system equipped with an FM radio. ・ This operation is not available in Self Mode. ・ It is unavailable if the supplied stereo earphone is used or any other external device is connected.
Setting 3G/GSM switch Default 1 2 AUTO m8912 Select an item Item Description Available network FOMA 3G AUTO Switches automatically to 3G (first priority), GSM and GPRS networks overseas and connects to FOMA network service within Japan. ٤ ٤ ٤ ٤ Connects only to 3G network overseas, and to FOMA network in Japan. ٤ ٤ ٤ ٤ 3G GSM/ Connects only to GSM GPRS and GPRS networks.
Declaration of Conformity The product “FOMA D905i” is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. This mobile phone complies with the EU requirements for exposure to radio waves.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.