User's Manual
Table Of Contents
- 1. SCOPE
- 2. PARTS NUMBER AND DESCRIPTION
- 3. REMARK
- 9. ANNEX
- 10. Frequency Bands in US FCC 15.245
- FCC caution: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may void the FCC authorization to operate this equipment.
- Manufacturers of mobile or fixed devices incorporating IVS-948_ME Modules are authorized to use the FCC
- Grants for their own final products according to the conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stating Contains FCC ID: 2ARCVIV...
- Following statements must be included in the instruction manual of host device.
DWG# : INS2019-001
Define & Design support
PTM Corporation,.
Page- 2 / 8
SCOPE
This datasheet & manual specify the K band RF front-end module to apply vehicles (including Train vehicle)
mounted velocity meter. Since this device is always used with vehicles, it is not sold to general end users
separately. Therefore there is no user manual of this device by alone.
PARTS NUMBER AND DESCRIPTION
Parts#
Region
Certification ID
IVS-948_ME Japan R001-A12270
USA 2ARCVIVS948
REMARK
Region Representative / Reseller PTM Corporation is responsible to every technical question except
manufacturing confidential. All the inquiries should be forwarded to representative.
Supplier /Representative PTM Corporation TEL: +81-45-938-6322