9362 Enterprise Cell V2.
WELCOME The Alcatel-Lucent 9362 Enterprise Cell provides enhanced mobile voice and data service within the building. It delivers high quality voice calls and faster, more reliable mobile data service. The Alcatel-Lucent 9362 Enterprise Cell connects to your broadband Internet service to deliver extended indoor mobile network coverage.
9362 Enterprise Cell – Getting Started Guide BOX CONTENTS Getting Started Guide 9362 Enterprise Cell V2.
CONNECTION OVERVIEW RESET Press 4 - 15 seconds to reset Press longer than 15 seconds to factory reset ROUTER 1 Gigabit Ethernet connector for backhaul connection If PoE+ is used to supply power then connect this to a PoE+ capable router or PoE+ injector (supplied AC/DC power adaptor is not used) POWER Connect the supplied AC/DC power adaptor. If you are using PoE+, power comes from the PoE+ device and you do not use the AC/DC power adaptor.
9362 Enterprise Cell – Getting Started Guide QUICK SETUP 1. Find a suitable location To get the best results from the Enterprise Cell it should be placed high up and as centrally as possible, since it emits a radio signal similar to a Wi-Fi router. Avoid placing it near metallic objects, windows or other radio transmitters. 2. Install unit The unit can stand on a flat surface or be mounted on a wall or ceiling 3.
INSTALLATION DESK 1 2 WALL & CEILING 1 2 3 For wall or ceiling mounting connect the cables to the Enterprise Cell before mounting the Enterprise Cell on the stand
9362 Enterprise Cell – Getting Started Guide STATUS ICONS Power: Red – the Enterprise Cell is powered on Flashing red – a problem has been detected, please contact your service provider Internet: White – an Internet connection has been established Pulsing white – connection in progress Orange – slow network connection Service: White – the Enterprise Cell is ready for use Orange – the Enterprise Cell is ready for use but there problems that might affect performance Users: White – the Enterprise Cell
FAQS How do I know that I am using my Enterprise Cell service? What happens if my broadband connection fails? Your mobile phone display will automatically indicate if you are within Femtozone signal range. If registered and configured properly your mobile phone should display a Femtozone service message and an associated signal indicator. If you lose your broadband connection the user status will turn orange and your Enterprise Cell coverage will stop.
362 Enterprise Cell – Getting Started Guide Safety Notes GENERAL: Please read this Getting Started Guide carefully before using the 9362 Enterprise Cell. The 9362 Enterprise Cell’s purpose is to provide improved mobile signal coverage inside a building. Do not use this device for any other purpose, as doing so may be dangerous. POWER: This product is intended to be supplied by a Listed Limited Power Source. This can be performed by a power adapter output rated 12 VDC, minimum 2.
service), all mobile calls, including emergency calls, will be redirected automatically to the default mobile (carrier) network. If you have no mobile network coverage and need to make an emergency call, please use a land line. In case of a thunderstorm, please disconnect the device to avoid damaging it. For safety reasons, only service technician’s skills can open the device.
9362 Enterprise Cell – Getting Started Guide — Reorient or relocate the receiving — antenna. Increase the separation between — the equipment and receiver. Connect the equipment into an — outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
www.alcatel-lucent.