User’s Guide HGW-500BNA-QC v2 Adaptador Wifi+ Dual Default Login Details http://192.168.1.90 Password: See device bottom label Firmware Version 1.
IMPORTANT! READ CAREFULLY BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Graphics in this book may differ slightly from the product due to differences in operating systems, operating system versions, or if you installed updated firmware/software for your device. Every effort has been made to ensure that the information in this manual is accurate.
Contents 4 Chapter 1: Configuration 4 Access the Adaptador Wifi+ Dual 5 Screen Layout 6 2.
Configuration 1 Chapter Chapter 1 C H A PT ER 1 1.1 Access the Adaptador Wifi+ Dual In your Internet browser go to IP address http://192.168.1.90 to connect to the Adaptador Wifi+ Dual’s web configuration screens. The login screen displays. The default password is on the sticker on the bottom of your device. Enter the password and click Entrar.
1.2 Screen Layout The first screen displays. Use the menu on the upper left to access the configuration screens and the help (Ayuda). Use Cerrar sesión on the upper right to log out.
1.3 2.4 GHz Wireless Configuration Click Asistente de Configuración in the menu and use the Wifi section to configure the Adaptador Wifi+ Dual’s 2.4 GHz wireless network settings. 1 Use Nombre Wifi to set the network name. 2 Set Ocultar nombre Wifi to Sí if you want to hide the network name from SSID scans. 3 Use Clave Wifi (Alfanumérica) to set the Wifi key (network password). Nivel de seguridad de la contraseña shows the password strength. 4 2.4 GHz wireless is enabled by default.
8 If your smartphone or tablet has a QR code reader application, you can scan the QR code to quickly get the 2.4 GHz wireless network settings to connect to the Adaptador Wifi+ Dual. 9 Click Aplicar Cambios to save and apply your 2.4 GHz settings. 1.4 Changing the Adaptador Wifi+ Dual’s Password Click Cambio Contraseña in the menu. 1 Enter the Adaptador Wifi+ Dual’s current password in Contraseña anterior and the new password in Contraseña nueva.
1.5 Device Information Click Información dispopsitivo in the menu to display the Adaptador Wifi+ Dual’s device details including the firmware version, LAN network settings, and 2.4 GHz WiFi network information. Click a hyper link to go to the screen where you can configure the setting.
1.6 LAN Configuration Click Red Local to configure the Adaptador Wifi+ Dual’s LAN network settings. 1 The DHCP feature enabled (ACTIVADO) by default to assign IP addresses and provide subnet mask, gateway, and DNS server information to LAN devices. You can configure the IP range. If you want to disable it, select DESACTIVADO. 2 Enter the Adaptador Wifi+ Dual’s LAN IP address (Red Local). Use the Chequea Direccion IP válida button it check if the IP address is valid.
• Use Actualizaciones Firmware desde red de Movistar to upload firmware from the Movistar network. Click Actualizar Firmware. The process may take several minutes. The Adaptador Wifi+ Dual reboots after a successful upload. Make sure you are using the correct firmware for this device. Do NOT turn off the Adaptador Wifi+ Dual while firmware upload is in progress! 1.
1.9 Help Click Ayuda in the menu to display the web configuration help.
Legal 2 Chapter Chapter 2 C H A PT ER 2 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.