Portable CD Player Model No.: MITRC100 INSTRUCTION MANUAL READ THIS INSTRUCTION MANUAL BEFORE OPERATING THE APPLIANCE. AND SAVE IT FOR FUTURE REFERENCE.
Table of Contents CONTENTS PAGE NO. CONTENTS ...........................................................................................2 CAUTION ...............................................................................................3 IMPORTANT SAFETY INSTRUCTIONS .................................................4 PREPARATION FOR USE.......................................................................5 LOCATION OF CONTROLS AND INDICATORS.....................................
CAUTION Symbol Work Definitions DANGER – Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. This symbol appears only in the most extreme situations. WARNING - Indicates a potentially hazardous situation which could result in death or serious injury. CAUTION - Indicates a potentially hazardous situation, which, if not avoided, may result in minor/ moderate injury or product/ property damage. It also warns against unsafe practices.
IMPORTANT SAFETY INSTRUCTIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) Read this Instruction Manual before you attempt to connect or operate the appliance. Keep these instructions in good condition. Heed all warnings. Follow all instructions. Save this Instruction Manual for future reference. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product. Dry location use only.
PREPARATION FOR USE Thank you for purchasing CD player. Please read this manual carefully before operating and reserve it for future reference. It will be helpful to you if you encounter any operational problem. 1. STANDARD ACCESSORIES Carefully remove all the accessories from the display carton. Please verify that you have all the following accessories before you dispose of the carton. Do not remove any labels or stickers on the back panels of the main unit.
LOCATION OF CONTROLS AND INDICATORS 1. FRONT AND TOP PANEL 1. FM antenna 8. Power on indicator 2. CD Door open/close 9. LCD display 3. FM Stereo indicator 10. Previous button 4. CD program button 11. CD Random button 5. CD Play/Pause button 12. Next button 6. CD stop button 13. CD Repeat button 7. Speaker 2. SIDE VIEWS 14. FM Frequency range display 18. FM Mono/Stereo switch 15. AUX in jack (3.5mm) 19. Function selector 16. AC in socket 20. Volume control 17. Tuning control 21.
OPERATING INSTRUCTIONS 1. To select the sound source by sliding the function selector on the side of the unit to FM RADIO, OFF and CD(AUX) mode. 2. To switch the unit off by sliding the function selector to off position. 3. Adjust the main volume level by turning the volume knob. 1. THE RADIO OPERATION Basic operation 1. Connect the supplied AC power cord or batteries. 2. Slide the FUNCTION switch on the unit to select RADIO mode. The power indicator will light up. 3.
LOADING AND PLAYING THE DISC 1) Slide the FUNCTION switch to select CD (AUX) mode. 2) Open the CD door by lifting the position marked OPEN/CLOSE on the CD door. 3) When the disc compartment has opened, remove a disc from its case and place it carefully onto the tray with the label side facing outwards. 4) Press down on the CD door until it latches into the closed position. 5) When the compartment is fully closed, the disc will be read automatically.
PROGRAMMED PLAYBACK The CD player can be programmed to play any sequence of up to 20 tracks. 1. Always press the Stop Button before the programming. 2. Press the PROGRAM button on the unit, and the program number “01” and PLAY/PROG. Indicator will be flashing on the display. 3. Press Previous/Next buttons repeatedly to select the desired track number. 4. Press the PROGRAM button again to confirm and save your selection, and “02” will be displayed soon. 5.
CARE AND MAINTENANCE CARE OF THE APPLIANCE To prevent fire or shock hazard your unit from the AC power source, Disconnect the appliance from the power source when cleaning. If the unit becomes dusty, wipe it with a soft and dry cloth to clean this appliance. Do not use any wax, polish sprays, or abrasive cleaners on the unit. CAUTION Never allow any water or other liquids to get inside the unit while cleaning. Dispose of used batteries in an environmental-responsible manner.
NO power The power plug is not securely connected. The electrical outlet is not operational. Ensure the power plug is securely connoted to main power outlet. Ensure the unit is plugged into an operating electrical outlet. The sound drips out Please check if the batteries are fresh. Please check if the discs are unavailable. Replace the new batteries. Clean the CD, or replace it if the disc is badly damaged.
