Z Series High Definition Acoustical System 1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM –1– AtlasIED.
Z Series Owner’s Manual Table of Contents Introduction............................................................................................................................................................................................................ 3 Key Features........................................................................................................................................................................................................... 3 Applications.....................
Z Series Owner’s Manual Introduction The Z Series is a multi-zone speech privacy system that also supports background music and paging applications. Model Z2-B is a two-zone speech privacy system providing 40-watts of total amplification and model Z4-B is four-zone speech privacy system delivering up to 80-watts of amplification. The Z Series is an all-in-one solution that not only supplies high quality speech privacy, but also can deliver high quality background music and paging.
Z Series Owner’s Manual Package Contents • Z2 or Z4 Unit, Qty 1 • External 100V – 240V to 24DCV UL Power Supply, Qty 1. Z2 = 2.5A, Z4 = 5.0A • Input Connectors and Speaker Connectors • Z Series Installation Sheet F G D A H B E C Fig 1 A. Control Panel B. Control Panel Dress End Caps C. Control Panel Mounting Screws M3 x 10mm, Qty 6 D. Dress Ring E. Dress Ring Screws M3 x 5.7mm, Qty 4 F. I/O Backbox G. In-Wall Support Brackets, Qty 2 H. In-Wall Support Bracket Screws M3 x 5.
Z Series Owner’s Manual Opening the Z Series 1. Remove the two Control Panel Dress End Caps. These End Caps are held by magnets with guide pins for alignment. They need to be lifted away from the panel. See Figure 2. 2. Remove the six Control Panel mounting screws. 3. Carefully tilt back the Control Panel to access the I/O Backbox. The Control Panel and I/O Backbox are connected via harness as seen in Figure 4.
Z Series Owner’s Manual Surface Mount - Direct to Wall 1. Determine the use of the Dress Ring and the wiring routing options. Note: The I/O Backbox Dress Ring and Side Support brackets can be left assembled or they can be removed. 2. Remove the front Control Panel from the I/O Backbox. The Dress Ring can be left on if preferred. Be careful removing the cables from the Control Panel PCB. 3. Secure the I/O Backbox to the wall or electrical box. 4. Wire the I/O Backbox.
Z Series Owner’s Manual In-Wall Mount 1. Cut a hole in the wall (8.27"H x 10.83" W). Make sure the hole has at least 2" of rear clearance. Note: Aligning one side over a stud is the easiest and most secure method. See Figure 13. 2. Remove the front Control Panel from the I/O Backbox. Be careful removing the cables from the Control Panel PCB. 3. Remove the Dress Ring from the I/O Backbox to allow access to the side mounted wall mount brackets. 4.
Z Series Owner’s Manual Rack Mount 1. The Rack Mount Kit is not supplied with the Z Series. The ZSERIES-RMK can be ordered at atlasied.com. 2. Remove the front Control Panel from the I/O Backbox. Be careful removing the cables from the Control Panel PCB. 3. Remove the Dress Ring and the two side mounted wall mount brackets from the I/O Backbox. The Rack Mount Plate replaces the Dress Ring. 4.
Z Series Owner’s Manual Wiring the Z Series I/O Backbox Before wiring the I/O Backbox, decide on the installation application required for the Z Series. There are a variety of application guides available at atlasied.com. This guide covers the Input and Output connections. Refer to Figure 18 for a visual aid. MODEL: Z2/Z4-Power REV:1.
Z Series Owner’s Manual Z Series Front Panel, Menu Display and Navigation Controls F E D C B A Fig 20 A. USB File Transfer Port - The port is used for uploading or downloading a project file. It is also used for updating firmware. To update the firmware refer to the “Updating the Firmware” section. B. Bluetooth® Streaming Music Status Indicator C. Display Menu D.
Z Series Owner’s Manual Navigation Menu Tree The Z Series menu tree allows access to settings for making adjustments to the Speech Privacy and Sound system. The menu tree is divided into two sections, User Control Settings and Advanced Settings. Note: The Advanced Settings can be password protected if needed.
Z Series Owner’s Manual Mic + Phantom Set Mic or Line > *Mic / Line: MIC Phantom: ON E Mic + Phantom Set Mic or Line > Mic Feedback Filter Set > *Mic Feedback Filter: ON Frequency: 200Hz E Mic Feedback Filter Set > BT/Aux Input Sensitivity Set > *Input Sensitivity = 775mv Adjust Up/Dn/Enter E BT/Aux Input Sensitivity Set > SHS EQ Set/Change > Paging: OFF Music: OFF E Paging: ON / OFF Music: ON / OFF Password Settings 0000 Up/Dn/Rt Select/ Enter E Change Password Enter PW > Change Password
Z Series Owner’s Manual Understanding Unique Menu Tree Features Masking & Privacy Volume Adjust - Each Zone has its own Masking and Speech Privacy Enhancement adjustments. These are separate adjustments but are relative to each other. 1. Masking Level Zone 1 - This adjusts the Level of Sound Masking only in Zone 1. Note: This adjustment is Pre or Before the Master Zone Level 1. 2. Privacy Level - This feature is designed to temporarily change the masking level.
Z Series Owner’s Manual Default Ship Mode, Factory Presets, and SHS EQ The Z Series can store 10 different programs that are called Presets. The Z Series is shipped with the Factory Preset active. This preset is designed to be used in many general applications. For a detailed list of functions of the other presets visit atlasied.com. Note: Presets are subject to change, refer to atlasied.com for up to date information and detailed application guides. Factory Default Mode FacDefaultV1.
Z Series Owner’s Manual Creating Custom Project Files Custom project files can be created by using the Z Series PC design software. This software can be downloaded at atlasied.com. Files can be custom created or modified to meet your application’s needs. Note: There is separate software for the Z2 and Z4 units. Refer to the Z2 / Z4 Preset Design software guide for software operation. Fig 19 Creating a Project File on the PC and Uploading to the Z Series 1. Create a design in the Z2 or Z4 PC software.
Z Series Owner’s Manual Z Series Optional Accessories Note: All series accessories can be used together. Wireless Enhanced Privacy Activation Sign Mobile App to Control Enhanced Privacy Activation Start Settings Z Series iOS® or Android® App Z-SIGN Wired Activation Wired Sign WPD-SWCC ASP-MG2240S A. ASP-MG2240S - The Enhanced Privacy In Use Wired Sign is used to inform the public that a Sound Masking system is in use for their security while having a private conversation.
Z Series Owner’s Manual D. Z Series App for iOS or Android - The Z Series App can be used to engage the Z2 or Z4 into the Enhanced Speech Privacy Mode. It can also be used to remotely adjust music, paging and masking levels per zone. Each input can be tuned to meet each zone’s acoustical requirements. Note: The level and tuning section of the Z Series App is password protected. ® ® • The App uses the smartphone Bluetooth® BLE® technology to connect to the Z2 / Z4 Base unit.
Z Series Owner’s Manual Turning on the Z Series Press and hold (3 sec) Enter on the Navigation control button and the unit will boot up. Don’t be alarmed if you are hearing masking present at the speakers. The Masking Level is set low to allow walking the area to see if all the speakers are functioning. Levels can be adjusted via the Navigation controls. From here select a different preset and change functions. Note: Settings are automatically saved when powering off or if there is a Power Failure.
Z Series Owner’s Manual System Type Z2-B Z4-B 40-Watt 2-Zone High Definition Acoustical System 80-Watt 4-Zone High Definition Acoustical System Power Supply Type 24VDC (2.
Z Series Owner’s Manual Internal Panel Features Power Input 24V DC, Z4 = 5A , Z2 = 2.5A, 2 Position, 5.08mm Euro Block, (Phoenix) AUX Input 3.5mm TRS Jack Paging (Mic / Line) 3 Position, 3.5mm Euro Block, (Phoenix) Fault GPIO Contact Closure (NC), Opens upon power failure or fault, 2 position Euro block, 3.5mm Privacy Engage 3 Position, 3.
Z Series Owner’s Manual Cooling Convection Yes Electrical Specifications (General) Masking Generator One Per Amplifier Channel Total Harmonic Distortion 1kHz and 1dB Below Rated Power Typical, 0.
Z Series Owner’s Manual Z2 and Z4 Dimensions (Shown in surface mount configuration) Scale 1:2 5-3-18 Drawn by Kevin S. Dimensional Drawings PRELIMINARY Surface Mount Configuration 2.32 59 Top 2.32 59 10.71 272 8.17 207.50 Front Flush Side Z2 and Z4 Dimensions (Shown with flush mount dress ring) Scale 1:2 5-3-18 DrawnConfiguration by Kevin S. Mount PRELIMINARY 2.32 59 Top 12.15 308.50 2.32 59 Front Side 9.35 237.50 1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
Z Series Owner’s Manual FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Limited Warranty All products manufactured by AtlasIED are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.