Installation Guide
114
MiTek
®
USP
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reser ved
Angles & Straps
Angles & Straps
KHL Heavy Angles
These multi-purpose braces are designed to provide reinforcement
for 90° wood-to-wood connections.
Materials: 12 gauge
Finish: G90 galvanizing
Installation:
• Use all specied fasteners. See Product Notes, page 18.
B66
B23
Typical B66
installation
BL4
B / BL Corner Braces
Ref. No. W L Qty Type Qty Type
B23 -- 12 2 2-5/8 6 16d -- --
B24 -- 12 2 3-5/8 8 16d -- --
BL3 A33 12 1-1/4 3-1/16 8 16d -- --
BL4 A44 12 1-1/4 4-13/16 10 16d -- --
BL6 -- 12 1-1/4 6-9/16 12 16d -- --
BL8 -- 12 1-1/4 8-5/16 14 16d -- --
B66 A66 12 1-1/2 6 -- -- 4 3/8
B88 A88 12 2 8 -- -- 6 3/8
1) Bolts shall conform to ASTM A 307 or better.
2)
NAILS:
16d nails are 0.162" dia. x 3-1/2" long.
--
Bolts
1
Fastener Schedule
MiTek USP
Stock No.
Steel
Gauge
Nails
2
Code
Ref.
Dimensions
(in)
Some model designs
may vary from
illustration shown
L
L
W
L
W
L
Designed for heavy-duty reinforcement of 90° framing intersections.
Materials: See chart
Finish: Primer
Options: See chart for Corrosion Finish Options
Installation:
• Use all specied fasteners. See Product Notes, page 18.
• Connectors are not load rated.
KHL335
KHL35G
Typical KHL35 installation
KHL55
Ref. No. W1 W2 L D1 D2 D3 D4 Qty Dia. Gussets
KHL33 HL33 7 3-1/4 3-1/4 2-1/2 1-1/4 -- 2 -- 2 5/8 --
KHL35 HL35 7 3-1/4 3-1/4 5 1-1/4 2-1/2 2 -- 4 5/8 --
KHL35G HL35G 7 3-1/4 3-1/4 5 1-1/4 2-1/2 2 -- 4 5/8 1
KHL37 HL37 7 3-1/4 3-1/4 7-1/2 1-1/4 2-1/2 2 -- 6 5/8 --
KHL335 SPECANGLE 3 3-1/2 5-1/4 3-1/2 -- -- -- -- 4 1/2 --
KHL43 HL43 3 4-1/4 4-1/4 3 1-1/2 -- 2-3/4 -- 2 3/4 --
KHL46 HL46 3 4-1/4 4-1/4 6 1-1/2 3 2-3/4 -- 4 3/4 --
KHL49 HL49 3 4-1/4 4-1/4 9 1-1/2 3 2-3/4 -- 6 3/4 --
KHL53 HL53 7 5-3/4 5-3/4 2-1/2 1-1/4 -- 2 2-1/2 4 5/8 --
KHL55 HL55 7 5-3/4 5-3/4 5 1-1/4 2-1/2 2 2-1/2 8 5/8 --
KHL57 HL57 7 5-3/4 5-3/4 7-1/2 1-1/4 2-1/2 2 2-1/2 12 5/8 --
KHL73 HL73 3 7-1/4 7-1/4 3 1-1/2 -- 2-3/4 3 4 3/4 --
KHL76 HL76 3 7-1/4 7-1/4 6 1-1/2 3 2-3/4 3 8 3/4 1
KHL79 HL79 3 7-1/4 7-1/4 9 1-1/2 3 2-3/4 3 12 3/4 2
1) All bolts shall meet or exceed the specifications of ASTM A 307.
Code
Ref.
--
MiTek USP
Stock No.
Steel
Gauge
Dimensions (in)
Bolts
1
Fastener Schedule
Corrosion
Finish
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
D2 D1
L
W1
W2
D3
D4
KHL335
L
W1
W2
Gusset
L
W1
W2
L
L
W