USER INTERFACE AND CONTROLS Control Panel Layout Key Names ROTARY KNOB AND MENU KEY. Rotary Knob Operation Menu Key Operation Using the Rotary Knob and Mani Ke Adjusting Volume Adjusting Bass, Treble, Settings Muting Output GETTING STARTED Powering the Unit On or Off Input Source Screens TUNER .listening to the Tune: Tuner Source Screens.
ROTARY KNOB AND MENU KEY ROTARY NOS OPERATION flan vivid TROUBLESHOOTING You can use the rotary knob three ways to control the operation of the source unit, Resetting the unit. Should the source unit become unresponsive: Remove power for § minutes and then reconnect. Rotary Turn Volume Press Mute Press and Hold for 2 seconds On/Off MENU KEY OPERATION You can use the Menu key to open. exit, or scroll through menus: [7 I] | Eve Preset | While listening to the tuner, press to save preset.
USING THE ROTARY KNOB AND MENU KEY You can use the rotary knob and Menu key to adjust levels and access menus. ADJUSTING VOLUME Use the rotary knob on the source unit to adjust the volume level: © kop JO The Volume screen Turn rotary knob to is: displayed. adjust. Tue rotary knob. ADJUSTING BASS, TREBLE AND OTHER SETTINGS Use the Menu key and the Forward/Backward keys to access menus and change settings.
AUXILIARY INPUT LISTENING TO AUXILIARY INPUT The source unit can accept audio from devices with an audio output. To listen to input farm an auxiliary device Press the Input source key EER until the AUX input source screen is displayed.
LISTENING THEREUNTO To select one of the available tuner bands: Press the Input source key Egy 10 select input from each of the following in turn: AM «FM The applicable input solstice screen is displayed for each band. Continuing to press the key will display the input source screens for Bluetooth® and Auxiliary as described in the section “Input Source Screens” on page 5. TUNER SOURCE SCREENS AM An example of a typical tuner input source screen is shown in Figure 2 below.