OVERHEAD AUDIO UNIT Model 2881115 - Accessory Model 2635986 - OEM 21A10201
NOTES FCC STATEMENTS: CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment.The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
NOTES CONTENTS USER INTERFACE AND CONTROLS Control Panel Layout Key Names ROTARY KNOB AND MENU KEY Rotary Knob Operation Menu Key Operation Using the Rotary Knob and Menu Key GETTING STARTED Powering the Unit On or Off Input Source Screens Adjusting Volume Level Muting Output Adjusting Tone Adjusting Screen Brightness TUNER Listening to the Tuner Tuner Source Screens Tuning Methods Adding and Removing Presets AUXILIARY INPUT Listening to Auxiliary Input Auxiliary Source Screen BLUETOOTH Playing Content Bl
USER INTERFACE AND CONTROLS NOTES CONTROL PANEL LAYOUT KEY NAMES Key 2 Name Key Name POWER BACKWARD MUTE PLAY / PAUSE SOURCE FORWARD MENU ROTARY KNOB
APPENDICES ROTARY KNOB AND MENU KEY TROUBLESHOOTING ROTARY KNOB OPERATION Resetting the unit. You can use the rotary knob two ways to control the operation of the overhead unit. Should the overhead unit become unresponsive: Remove power for 5 minutes and then reconnect. 1 Rotary Turn 2 Press MENU KEY OPERATION You can use the Menu key to open or exit from menus: 14 Menu Key Press the Menu key to open a menu.
USING THE ROTARY KNOB AND MENU KEY You can use the rotary knob and Menu key to adjust levels and access menus. OVERHEAD UNIT CONNECTIONS ADJUSTING LEVELS Use the rotary knob and Menu key to adjust levels on the overhead unit; for example, to adjust the volume level: CONNECTING THE OVERHEAD UNIT ALL WIRE CONNECTIONS ARE ON THE PASSENGER SIDE PASSENGER SIDE 20 Turn rotary knob to open the volume screen. Turn rotary knob to adjust the level. Press Menu to exit (or leave to time out).
BLUETOOTH GETTING STARTED PLAYING CONTENT POWERING THE UNIT ON OR OFF The overhead unit can accept audio from devices with Bluetooth. When you power on the overhead unit it will automatically start playing music from the most recently selected input source. To listen to input from a Bluetooth device: TO POWER THE UNIT ON OR OFF Press the Input source key [ ] until the Bluetooth input source sceen is displayed.
ADJUSTING VOLUME LEVEL AUXILIARY INPUT To adjust the volume level: LISTENING TO AUXILIARY INPUT The overhead unit can accept audio from devices with an audio output. 20 Turn rotary knob. The Volume screen is displayed. To listen to input from an auxiliary device: Turn rotary knob to adjust. Press Menu to exit or leave to time out. Press the Input source key [ ] until the AUX input source screen is displayed.
ADDING AND REMOVING PRESETS ADJUSTING TONE The overhead unit allows you to set up your favorite AM/FM stations as presets for easy recall. Note: Up to 15 presets can be stored for each radio band. To adjust the bass or treble level: TREBLE BASS BALANCE LCD CONTRAST LCD BRIGHTNESS When you are using the tuner, the Play/Pause, Forward, Backward and Menu keys provide special options to allow you to work with preset frequencies (AM/FM). Press Menu key.
TUNING METHODS TUNER You can use three methods to tune the overhead unit: automatic, manual and preset. LISTENING TO THE TUNER To select one of the available tuner bands: Press the Input source key [ ] to select input from each of the following in turn: • AM • FM The applicable input source screen is displayed for each band. Continuing to press the key will display the input source screens for Bluetooth and Auxiliary as described in the section “Input Source Screens” on page 5.