N672x User Manual
Revision: R00 (11/2020) Trademark All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and documents are subject to change without notice. Note Not all models are available in all regions. Not all features are available on all models. Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document.
Table of Contents Getting to Know Your Device........................................................................................ 4 Front and Back......................................................................................................... 4 Left and Right........................................................................................................... 4 Top and Bottom........................................................................................................
Regulatory Information................................................................................................ 22 FCC........................................................................................................................ 22 CE.......................................................................................................................... 22 RF Exposure Information (SAR)............................................................................ 23 WEEE......................
1 Device Basics 1 Device Basics 1Getting Device Basics to Know Your Device Getting to Know Your Device Getting to Know Your Device Front and Back Getting to Know Your Device Front and Back Front and Back ❶❷❸❹ Front and Back ❶❷❸❹ ❺❻ ❼ ❽❾ ❿⓫ ⓬ ⓭ ❺❻ ❼ ❽❾ ❿⓫ ⓬ ⓭ ❶❷❸❹ ❺❻ ❼ ❽❾ ❿⓫ ⓬ ⓭ ⓱ ⓰ ⓯ ❽ ⓮ ⓱ ⓰ ⓯ ❽ ⓮ ❿ ⓱ ⓰ ⓯ ❽ ⓮ ❿ Left Leftand andRight Right Left and Right Left and Right ❿ Front camera lens* Chargecamera indicator Front lens* ❸ Light sensor ❷ Charge indicator ❶ Front camera lens* ❹ Proxi
Using the Battery Installing and Removing the Battery 1. Slide the battery cover latch downward to unlock the battery cover ( 1 ). Using the small opening (beside the power button) as the release point ( 2 ), pry the cover open along the side, and then remove the cover. 1 2 2 2. With the label side facing up, match the battery's contact points ( 1 ), insert the battery at an angle, and then fit it into the compartment.
Charging the Battery When charging the battery for the very first time, you should charge it for at least 8 hours (using the AC charger) with your device turned off. Push the clip outwards ( 1 ), insert the plug to the AC charger and then push the clip inwards to lock the ❶ ❷ plug in place ( 2 ). Attach the charging cable to the device by lining up the connector on the holder to the dock connector on the bottom of the device ( 3 ). Make sure that the holder slides into the sockets on the device properly.
Extending the Battery Life There are various ways to improve the device's battery life. • Always fully charge the battery. • Turn on Battery saver (Settings Battery Battery Saver). • Turn off unnecessary sounds, such as touch sounds. • Close an app when you are not using it. • Use a shorter timeout setting of the screen (Settings Display Advanced Screen timeout). • Lower the brightness level of the screen. • Turn off Bluetooth when you are not using it.
Using the Memory Card and SIM Card 1. Follow the instructions in the "Installing and removing the battery" section to remove the battery cover, and then remove the battery out of the battery compartment. 2. Locate the MicroSD card slot ( 1 ). Hold the MicroSD card by the edges and gently insert it into the slot. Press until the card clicks into place. Depending on the model, your device may use a Nano SIM card. Locate the Nano SIM card slot ( 2 ).
Turning the Device On and Off Turning On Press and hold the Power button for about 2 seconds to turn on your device. Wait for the boot screen to display. The Home screen will display and the device is in Lock mode by default. Drag the Lock icon ( upwards to unlock. The device is ready for use. ) Sleep Mode Your device will automatically switch off the screen after 1 minute (by default) of inactivity. You can manually switch off the screen by pressing the Power button briefly.
Connecting the Device to a Computer To connect the device to a computer, use the device charger to connect the two devices. ✎ When you connect the device to your computer for the first time, allow the USB driver of the device to be installed properly on your computer.
Using the Touch Screen To operate your device, touch the screen with your finger. You can perform the following actions: • Tap: Touch the screen once with your finger to open items or select on-screen buttons or options. • Tap and hold: Tap and hold on the desired item to open the pop-up menu that contains the available options for the item. • Drag: Tap and hold on the item and then move it to the target position without releasing your finger.
Home Screen The Home screen is your starting place for tasks, providing quick access to frequently used applications and settings. • To open the App drawer, swipe up from the bottom of the screen with one finger. • To display the Home screen, tap the Home button ( ) at any time. Home button Status Bar The status bar is at the very top of the screen, displaying system status icons and notification icons. ✎ Depending on your use of the device, some icons are not always shown in the status bar.
3. Tap and hold the desired app until the Home screen appears, drag it into place, and lift your finger. To add a widget: 1. Go to the screen where you want to place the widget. 2. Tap and hold anywhere on the desktop, and select Widgets. 3. Scroll up and down to explore the available widgets. 4. Tap and hold the desired widget until the Home screen appears, drag it into place, and lift your finger. To move a shortcut or widget to another position: 1.
• Do not disturb Set how and when to receive notifications. • Flashlight • Auto-rotate Set the device's orientation to automatically rotate or lock in the portrait mode. • Battery Saver • Mobile data See the cellular data usage, or turn it on or off. • Airplane mode • Screen Cast Your Apps To see all your apps, swipe up from the bottom of the screen to open the App drawer. You can place an app icon on any of the screens on the desktop.
Barcode Reader ✎ This feature is for selected models only. By using the Barcode Reader, your device will be able to read the information contained in the barcode. Turning Barcode Reader On and Off 1. Open the App drawer and tap BCR Settings ( 2. Tap the BCR Settings switch to turn it on ( ). ) or off ( ). Using the Barcode Reader 1. Open the App drawer and tap BCR Reader ( ). 2. Position your device close to the barcode (approximately 5~10 cm) and point the barcode reader sensor to the barcode. 3.
Using the Keyboard When you select a field that requires text or numbers, the on-screen keyboard will automatically appear. You can use the on-screen keyboard to enter text, numbers, symbols, etc. Some apps open the keyboard automatically. In others, tap where you want to type to open the keyboard. As you type, predictive suggestions for completing each word appear above the keyboard.
Connectivity Cellular Data Connection ✎ This feature is not available on all models. To use cellular services, you must insert a Nano SIM card with an active data subscription plan from a mobile network provider. In most cases, the settings of the cellular services are installed automatically. To turn cellular services on/off: 1. Open the App drawer and tap Settings Network & internet Mobile network. 2. Tap the Mobile data switch to turn it on or off.
Pairing with Another Bluetooth Device 1. Make sure that the Bluetooth function of the other device is turned on. 2. Open the App drawer and tap Settings Connected devices Pair new device. 3. The device will automatically scan for available Bluetooth devices. 4. Tap the desired device from the list to initiate pairing. 5. Make sure that the same passkey is displayed on your device and the other device, and then tap PAIR. ✎ Turn off the Bluetooth function when not in use to save battery power.
Personalising Your Device You can easily customise the device for personal settings through the Settings menu, such as personalising the Home screen, changing the display and sound settings, configuration the connection settings, and more. Settings Menu To access the Settings menu, do one of the following: • Open the App drawer and tap Settings. • Slide down from the top of the screen with two fingers or twice with one finger to open Quick Settings, and tap .
Reference Troubleshooting For initial support, contact your IT department or your local authorised dealer. Power does not switch on when using battery power. The remaining battery power may be too low to run your device. Charge the battery. Screen responds slowly. Make sure that your device is not running out of battery power. If the problem still persists, restart your device. Screen freezes. Restart your device. Screen is hard to read.
• Keep your device and its accessories out of the reach of small children or animals. • Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your device, its parts or accessories. • To discourage theft, do not leave the device and accessories in plain view in an unattended vehicle. • Do not leave the device and its accessories in a vehicle in direct sunlight. Overheating may damage the device.
Regulatory Information For regulatory identification purposes, the product is assigned a model number of N672A & N672B. Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this chapter. Some notices apply to specific models only. Maximum radio frequency (RF) power for Europe: • WLAN 2.
Compliance with these directives implies conformity to the following European Standards: • EN301489-1: Electronic compatibility and Radio spectrum Matters (ERM), ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements • EN301489-17: ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard covering the essential requirements of article
RF Exposure Information (SAR) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit.
Safety Precautions When using the device, note that the ambient temperature should be below 45ºC (113ºF). To prevent possible hearing damage, do not listen at high volume levels for long periods of time. LASER LIGHT - DO NOT STARE INTO BEAM RAYONNEMENT LASER NE PAS REGARDER DANS LE FAISCEAU. About Charging • Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger.
