User's Manual

Capacity
Type-C Input
5V/3A,9V/3A,12V/3A,15V/3A,20V/3A
PD60W(max)
5V/3A,9V/3A,12V/3A,15V/3A,20V/3.25A
PD65W(max)
Type-C Output
173*95*47mm
800/g
3.3 hours
Li-polymer
USB 1 Output
USB 2 Output
Wireless Charging
DC5525 Output
5V/3A,9V/2A,12V/1.5A 18W (max)
5V/3A,9V/2A,12V/1.5A 18W (max)
15W(max)
12V 2A(max)
Product size
Product net weight
Full charging time
Operation temperature
Battery type
30000mAh/111Wh
TSB9265 User Manual
Thank you for purchasing this power bank.
Please read the manual carefully before use,
and keep it for reference in the future.
Specification:
Operating instructions:
Features:
30000 mah large capacity
Ip66 waterproof
Hanging hook for easy carrying
PD 65W Output
DC 5525 Output
15W wireless charging
5 LED indicators to show battery level and status
Quadrangle edge shockproof design
Product presentation:
USB 1 Output
USB 2 Output
DC 5525 Output
Type-C Input&Output
Led lights
Hanging hook
5 LED Indicators
Power button
Wireless charging
Soild white
Charging
Status
LED
Indicators
25%~50%0%~25% 50%~75% 75%~99% 100%
1st
2nd
3rd
4th
5th
Flashing
white
OFF
OFFOFF
OFFOFF
OFF
Flashing
white
Flashing
white
Green LED is fast charging
Flashing
white
Usb1 18W Output
Type-C Input Views
15W wireless charging
12V/2A DC5525 Output
Type C PD 65W Output
Charging the power bank from an external power source:
Usb2 18W Output
Accessory List : User Manual, Power Bank，Cable
-1- -2- -3- -4-
1. Use the included USB charging cable connect to a power source
such as an AC power adapter or any other USB power source
2. Battery’s charging status is indicated by 5 LED indicators in the
following manner:
1. Connect the USB charging cable to your mobile device, it
will start to charge automatically
2. Power bank will shut off within 8 seconds when
disconnected
Charging mobile devices:
IC Statement:
FCC Statement:
Note:
The full charging time is only for your reference, please refer to actual
operation.
High quality guarantee, using A-grade Li-polymer battery cell for this
power bank.
Please use a cable matching your mobile phone and digital product.
Slight heating may appear during charging and discharging.
Please store this Power Bank in a dry and cool place when not used.
If not used for a longer period, please make sure the Power Bank is
fully charged at least every 6 months.
Please use the cable purchased with your Power Bank for charging it.
Please avoid metal or sharp items next to the Power Bank, to avoid
scratches or damage.
Don’t leave the Power Bank directly exposed to sunlight, as it may
overheat.
● DO NOT attempt to open or dismantle the product.
● DO NOT subject the power bank to naked flames or extreme
heat.
● DO NOT stand on or otherwise apply pressure to the power
bank.
● DO NOT allow children to play with the power bank.
● As the device will charge in high temperatures please ensure the
device is never charging for a longer period of time, as it has a
maximum temperature of 45°C (113°F).
● Stop using this power bank if you experience expansion or break
down, and contact local distributor
.
1.
2.
3.
4.
5.
7.
8.
9.
Warning:
-5- -6-
It can charge 5 devices at the same time
When two or more devices are charged at the same time,
the output power of the usb1 and usb2 will decrease from 18w to 15w
The PD065 does not support charging low-current devices
NO/OFF Button
1.Press the button once to check power status and
activate wireless charging. then press button twice
to activate DC5525 output
2.Long press the power to turn on the flashlight
3.Press again shift to caution light
4.Press once again shift to SOS
5.Press once again shift to flashlight
6.Long press the button to turn off LED light
The fifth light is green when fast charging is in progress
The DC 5525 output the first light is blue
1
2 3 4 5
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
The term “IC: “ before the certification/registration number only
signifies that the Industry Canada technical specifications were
met. This product meets the applicable Industry Canada
technical specifications.
Cet appareil contient des émetteurs / récepteurs exemptés de
licence conformes aux RSS (RSS) d'Innovation, Sciences et
Développement économique Canada. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Ch anges or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.