Mistral Confidential QCNFA324 Product name: 2x2 802.
Mistral Confidential NOTICE The information in this document is reviewed and is believed to be accurate. Nonetheless, this document is subject to change without Notice and Mistral Solutions private Limited (Mistral) assumes no responsibility for any inaccuracies that may be contained in this document, and make no commitment to update or to keep current the contained information, or to notify a person or organization of any updates.
Mistral Confidential Table of Contents Introduction .................................................................................................................................................. 4 Functional Specification ................................................................................................................................ 4 RF Characteristics .......................................................................................................................................
Mistral Confidential Introduction This documentation describes the specification of QCNFA324 (WLAN/BT) Combo Module. This module design is based on the Qualcomm Atheros chipset. The QCA6174A-1 is a singlechip wireless local area network (WLAN) and Bluetooth (BT) combo solution to support 2x2 MIMO with IEEE802.11a/b/g/n/ac WLAN standards and BT4.2+HS enabling seamless integration of WLAN/BT and Low Energy technology. Functional Specification • • • • • • • WLAN dual-band 2x2 11a/b/g/n/ac and Bluetooth V4.
Mistral Confidential RF Characteristics All typical performance specification are based-on operation at room temperature (+25℃) using default parameter setting and nominal supply voltages at RF connector port. WiFi Data Rate 802.11b 11, 5.5, 2, 1 Mbps 802.11 a/g 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n HT20 mode: MCS0~MCS15, up to 144.4Mbps HT40 mode: MCS0~MCS15, up to 300Mbps 802.11ac VHT20 mode: MCS0~MCS8: up to 173.3Mbps VHT40 mode: MCS0~MCS8: up to 400Mbps VHT80 mode :MCS0~MCS9,up to 866.
Mistral Confidential Operating System Support Support the Win7& Win8.1&Linux & Android operating system on normal driver. Operating Temperature Conditions The product shall be capable of continuous reliable operation when operating in ambient temperature of -10℃ to +70℃. RF Connector Type • • • The standard 2x2mm size RF receptacle connectors to be used in conjunction with the M.2 boards/modules. The same RF Receptacle on module supports either 0.81mm or 1.13mm diameter cable. Prefer to use 1.
Mistral Confidential Infrastructure Mode In infrastructure mode, communication between two nodes on the network flows through the access point. Computer A actually "talks" to the access point, which in turn talks to Computer B.
Mistral Confidential To setup your device as a Wi-Fi hotspot in Android 1. Turn off Wi-Fi power by touching Apps -> Settings -> Under Wireless & networks turn WiFi Off. 2. From the home screen, touch Apps -> Settings -> More -> Tethering & Mobile Hotspot > Mobile Hotspot to turn on the hotspot. 3.
Mistral Confidential To connect through Bluetooth on device using Android 1. Open the Settings app in Android 2. Tap Connected devices -> Connection preferences -> Bluetooth. If you don't see "Connection preferences," go to the next step. 3. Make sure Bluetooth is turned on. 4. In the list of paired devices, tap a paired but unconnected device. 5. When your device and the Bluetooth target are connected, the target device will be shows as "Connected.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual v01 rule sections: 2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition.
2.9 Information on test modes and additional testing requirements This transmitter is tested in a standalone mobile RF exposure condition and any co-located or simultaneous transmission with other transmitter(s) or portable use will require a separate class II permissive change re-evaluation or new certification. 2.