Mistral Confidential QCNFA324 Product name: 2x2 802.
Mistral Confidential NOTICE The information in this document is reviewed and is believed to be accurate. Nonetheless, this document is subject to change without Notice and Mistral Solutions private Limited (Mistral) assumes no responsibility for any inaccuracies that may be contained in this document, and make no commitment to update or to keep current the contained information, or to notify a person or organization of any updates.
Mistral Confidential Table of Contents Introduction .................................................................................................................................................. 4 Functional Specification ................................................................................................................................ 4 RF Characteristics .......................................................................................................................................
Mistral Confidential Introduction This documentation describes the specification of QCNFA324 (WLAN/BT) Combo Module. This module design is based on the Qualcomm Atheros chipset. The QCA6174A-1 is a singlechip wireless local area network (WLAN) and Bluetooth (BT) combo solution to support 2x2 MIMO with IEEE802.11a/b/g/n/ac WLAN standards and BT4.2+HS enabling seamless integration of WLAN/BT and Low Energy technology. Functional Specification WLAN dual-band 2x2 11a/b/g/n/ac and Bluetooth V4.
Mistral Confidential RF Characteristics All typical performance specification are based-on operation at room temperature (+25℃) using default parameter setting and nominal supply voltages at RF connector port. WiFi Data Rate 802.11b 11, 5.5, 2, 1 Mbps 802.11 a/g 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n HT20 mode: MCS0~MCS15, up to 144.4Mbps HT40 mode: MCS0~MCS15, up to 300Mbps 802.11ac VHT20 mode: MCS0~MCS8: up to 173.3Mbps VHT40 mode: MCS0~MCS8: up to 400Mbps VHT80 mode :MCS0~MCS9,up to 866.
Mistral Confidential Operating System Support Support the Win7& Win8.1&Linux & Android operating system on normal driver. Operating Temperature Conditions The product shall be capable of continuous reliable operation when operating in ambient temperature of -10℃ to +70℃. RF Connector Type The standard 2x2mm size RF receptacle connectors to be used in conjunction with the M.2 boards/modules. The same RF Receptacle on module supports either 0.81mm or 1.13mm diameter cable. Prefer to use 1.
Mistral Confidential Infrastructure Mode In infrastructure mode, communication between two nodes on the network flows through the access point. Computer A actually "talks" to the access point, which in turn talks to Computer B.
Mistral Confidential To setup your device as a Wi-Fi hotspot in Android 1. Turn off Wi-Fi power by touching Apps -> Settings -> Under Wireless & networks turn WiFi Off. 2. From the home screen, touch Apps -> Settings -> More -> Tethering & Mobile Hotspot > Mobile Hotspot to turn on the hotspot. 3.
Mistral Confidential To connect through Bluetooth on device using Android 1. Open the Settings app in Android 2. Tap Connected devices -> Connection preferences -> Bluetooth. If you don't see "Connection preferences," go to the next step. 3. Make sure Bluetooth is turned on. 4. In the list of paired devices, tap a paired but unconnected device. 5. When your device and the Bluetooth target are connected, the target device will be shows as "Connected.
Mistral Confidential Federal Communication Commission Interference Statement FCC Statements (USA) FCC ID: 2AVEC-QCNFA324 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Mistral Confidential This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: The module is tested for standalone portable RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) will need a separate reassessment through a class II permissive change application or new certification.
Mistral Confidential FCC COMPLIANCE STATEMENT FCC ID : 2AVEC-QCNFA324 Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required.
Mistral Confidential Label and compliance information The final end product must be labeled in an easily visible area with the following: “Contains FCC ID: 2AVEC-QCNFA324”. An important note is that the grantee's FCC ID can be used only when all FCC compliance requirements are met. Industry Canada (IC) Statement IC : 26058-QCNFA324 HVIN: QCNFA324 MODEL: QCNFA324 Compliance Statements: This device complies with Industry Canada license-exempt RSS standard(s).
Mistral Confidential Label and compliance information The final end product must be labeled in an easily visible area with the following: “Contains IC : 26508QCNFA324”. An important note is that the grantee's IC can be used only when all IC compliance requirements are met. Informations d'étiquetage et de conformité Le produit final final doit être étiqueté dans une zone facilement visible avec ce qui suit: «Contient IC: 26508-QCNFA324».