Mirion Technologies Ultra-Wideband OEM Module User Manual Version 4 - September 2020 1
Table of Contents Version History 3 Overview 4 Product Specifications 5 Main System Components 5 Mechanical 5 RF Characteristics 5 United States (FCC) Regulatory Information 6 Canada (ISED) Regulatory Information 8 Page 2 of 10
Version History Version 1 – August 2020: Initial Release Version 2 – September 2020: Including additional required information Version 3 – September 2020: Including additional required information Version 4 – September 2020: Including additional required information Page 3 of 10
Overview The OEM module is a part of the Mirion Technologies Orion RTLS system. The module utilizes ultra-wideband (UWB) pulses to communicate data and timestamp information to other UWB devices in the system. This information is used to calculate the position and movement of the OEM module.
Product Specifications Main System Components Microcontroller: RF Transceiver: Sensors: Indicators: Operating Voltage: Operating Temperature: Storage Temperature: Nordic nRF52840 MCU BLE Transceiver Decawave DW1000 Ultra-Wideband (UWB) IEEE802.15.4-2011 Accelerometer LED 3.0 - 3.6V (3.3V nom.) -20°C to 65°C -40°C to 65°C Mechanical Length: 40 mm Width: 20 mm Height: 7.8 mm Weight: 3.4 g RF Characteristics UWB IEEE802.15.
United States (FCC) Regulatory Information FCC ID: 2AWTM-RTLS-OEM001 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
To fulfill FCC Certification requirements, an OEM manufacturer must comply with the following regulations: 1. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: IMPORTANT: Contains FCC ID: 2AWTM-RTLS-OEM001.
Canada (ISED) Regulatory Information IC: 21847-RTLSOEM001 CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
This radio transmitter (IC:21847-RTLSOEM001) has been approved by ISED Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (IC:21847-RTLSOEM001) a été approuvé par ISED Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 1 condition ci-dessus sont remplies, des essais supplémentaires sur l’émetteur ne seront pas nécessaires. Toutefois, l’intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.