IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
WARNING 1. FOR OUTDOOR USE: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 2. UNDER WET LOCATION: Apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on the apparatus. 3. SERVICE INSTRUCTIONS: CAUTION These servicing instructions are for use by qualified service personnel only.
Portable Wireless PA System |. Part Names Front Panel Rear Panel 5 90083050) Control Panel 3 All rights reserved. Do not copy or forward without prior approvals of MICRO. Specifications and design subject to change without notice.
Portable Wireless PA System Front Panel: © Retractable Carry Handle © Speaker @ Heat Sink © Fixed Handle © Speaker Grille @ Tripod Stand Mount © Microphone Storage Compartment Rear Panel: © Slot for Optional CD/USB Media Player Module @ DC 24-32V Power Connector © Slot for Optional Receiver Module @ Battery Charging Status Indicator @ AC Power push button @® AC Power Cord Socket Master Power Switch with Battery Low Indicator { Battery Compartment Cover Plate {® Passive Extension Speaker Socket @ Trolley Whe
Portable Wireless PA System Il. Operating Instructions 1. Power On: Minimize all volume levels before turning on the Master Power Switch A lit red battery indicator denotes rechargeable battery is charged. A flashing red battery indicator denotes rechargeable battery is low on power. Simply plug the supplied power cord into the power socket on the back and the other end into an AC power outlet to recharge the battery. Amplifier can be used simultaneously during charging.
Portable Wireless PA System lll. Connection for External Audio Sources TONE LINEN et Nigh LINE GUT LINEN MC © mc 000 Cable no: 2FA030 2B o/ MP3 Player EET Mobile Phone o® of 6 All rights reserved. Do not copy or forward without prior approvals of MICRO. Specifications and design subject to change without notice.
Portable Wireless PA System IV. Power Supply 1. AC Power Supply: (A) Connect AC Power Cord Socket and plug the system into an AC outlet to charge the builtin rechargeable batteries. The AC Power and Battery Status Indicator ( blinks red during charging. The AC Power and Battery Status Indicator glows red and stops blinking when it is fully charged. (B) AC power provides powers to both the system itself and to the built-in rechargeable batteries.
Portable Wireless PA System V. Installation of MICRO Receiver Modules 1. 3. VI. Each device allows up to two receiver modules to be installed. MICRO offers different receiver modules, and users can select the proper one they desire. Use a Phillips-head screwdriver (not supplied) to remove the screws and then the protection cover panel. Insert the receiver module into the slot. Push it a little harder and make sure the back edge connector is aligned and firmly connected. Then tighten up the screws.
Portable Wireless PA System VII. Helpful Operating Tips Minimized the master volume control ® before powering on. Adjust the volume controls afterwards. Each audio input volume can be individually controlled and mixed out through the amplifier. Each audio input can be broadcaster and recorded at the same time. This PA system can be installed with an optional wireless microphone system.
PRO MICRO Electronics Co., Ltd Headquarters: No. 814, Being Rd., Chianti City 600079, Taiwan Tel : +886.5.238.0809 Fax : +886.5.238.0803 MICROPHONE PROFESSIONALS www. micro com tw All rights reserved. YM 022/05 not copy or forward without prior approvals of MICRO. 2CE AE Specifications and design subject to change without notice.