User Manual Part 1

ManualsBrandsMipro Electronics ManualsElectronicsTransmitter

Table Of Contents

Instruction Manual

ACT-8H : DIGITAL WIRELESS HANDHELD MICROPHONE

ACT- 8T : DIGITAL WIRELESS BODY PACK TRANSMITTER

Disposal

Dispose the unusable device according to valid regulations.

Disposal of spent batteries/accumulators

You are required by law to return all spent batteries. Disposing of used

batteries with domestic waste is prohibited!

Batteries / NiCad cells containing toxins are marked by

accompanying symbols that refer to the prohibition of

disposal with domestic waste. The designations for the

decisive heavy metals are: Cd=cadmium, Hg=mercury,

Pb=lead. You may return spent batteries/accumulators free

of charge to the recycling centres, our outlets or anywhere

else where batteries/accumulators are sold.

By doing so, you fulfil the legal requirements and contribute to the

conservation of our environment!

2005-08-13

Electronics Co., Ltd.

Head office: 814, Pei-Kang Road, Chiayi, 60096, Taiwan.

Taipei office: 5, Lane 118, Sung-teh Road, 10075, Taipei, Taiwan.

Web-http: //www.mipro.com.tw

E-mail: mipro@mipro.com.tw

2 CE2 6 3

Digital Wireless Microphone Systems

Summary of content (8 pages)

PAGE 1
Disposal Dispose the unusable device according to valid regulations. Digital Wireless Microphone Systems Disposal of spent batteries/accumulators You are required by law to return all spent batteries. Disposing of used batteries with domestic waste is prohibited! 2005-08-13 Batteries / NiCad cells containing toxins are marked by accompanying symbols that refer to the prohibition of disposal with domestic waste. The designations for the decisive heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead.
PAGE 2
DIGITAL WIRELESS HANDHELD MICROPHONE DIGITAL WIRELESS HANDHELD MICROPHONE 1. Part Names and Functions ACT-8H DIGITAL WIRELESS HANDHELD MICROPHONE 1 Main features: 2 3 5 4 OFF SET MODE 1. 2. 3. 4. 5. 6. 7. 8. 9. The world's first 24-bit true digital handheld wireless microphone, combining the best design and the most advanced features.
PAGE 3
DIGITAL WIRELESS HANDHELD MICROPHONE DIGITAL WIRELESS HANDHELD MICROPHONE 2. Battery Removals and Installation 3. Rear Cap On/Off Switch Protection The patented color rear cap serves two purposes, provides easy channel identification and protecting the toggle on/off switch. It allows the on/off switch to either be exposed or concealed as desired. You can avoid unintended switching off of the microphone by rotating the color rear cap 180 degrees to cover the on/off switch completely.
PAGE 4
DIGITAL WIRELESS HANDHELD MICROPHONE DIGITAL WIRELESS HANDHELD MICROPHONE A. Operate via MODE Button (1)GR-CH: Displays Information of Group and Channel MODE FREQ RF RF B. Operation Guide: BT AF a. BT AF Press ''MODE'' and stop on "FREQ" function, the display showing current frequency will be flashing. After 5 seconds, the display will stop flashing. "FREQ" function is added to display frequency information. Changing current frequency must be done on the receiver. B. 5 A.
PAGE 5
DIGITAL WIRELESS HANDHELD MICROPHONE DIGITAL WIRELESS HANDHELD MICROPHONE A. Operate via MODE Button (4) AF-SEN: Setup and Change of Input Sensitivity OFF SET RF RF 6dB MODE RF LIMIT ON SET BT AF BT AF B. Operation Guide: BT AF a. 5 b. A. Operate via MODE Button Press "MODE" and stop on "LIMIT" function, the display showing current state will be flashing and is ready to be modified. Press ''SET'' to change the setting to "ON" or "OFF".
PAGE 6
DIGITAL WIRELESS HANDHELD MICROPHONE DIGITAL WIRELESS HANDHELD MICROPHONE 7. BT: Displays Information of Battery Level 5. Cautions 1. BT BT 100% 90% BT BT BT BT 80% 40% 10% 0% When the battery level drops down to 10%, please replace or recharge the battery. If the battery continues to be used at a very lower level, the LCD will display "PO--OFF" and then automatically switch off to avoid over-discharging the battery. 2. 3. 8.
PAGE 7
DIGITAL WIRELESS BODY PACK TRANSMITTER DIGITAL WIRELESS BODY PACK TRANSMITTER 1. Part Names and Functions ACT- 8T DIGITAL WIRELESS BODY PACK TRANSMITTER 1 Main Features: 2 1. 2. 3. 4. 5. 6. 7. Super-compact magnesium alloy housing protects the circuit board. Separated antenna, toggle power switch and XLR input connector. LCD displays channel / battery level / input SPL, error message, etc. on front panel. Equipped with push buttons to set up different functions.
PAGE 8
DIGITAL WIRELESS BODY PACK TRANSMITTER DIGITAL WIRELESS BODY PACK TRANSMITTER 3. LCD Panel Functions 2. Battery Removals and Installation Removing the Battery: LCD RF A AF B BT Function Selection: Mode Switch: To select from different menu 1 1. 2. 2 The LCD panel has 6 functions displayed sequentially; their respective descriptions and operations are as follows: 3 Push open the belt clip in the direction shown in step 1 to remove the belt clip.