User's Manual

ManualsBrandsMipro Electronics ManualsElectronicsTransmitter

Table Of Contents

Disposal

Dispose the unusable device according to valid regulations.

Disposal of spent batteries/accumulators

You are required by law to return all spent batteries. Disposing of

used batteries with domestic waste is prohibited!

By doing so, you fulfil the legal requirements and contribute to the

conservation of our environment!

2005-08 -132005-08 -13

Batteries / NiCad cells containing toxins are marked

by accompanying symbols that refer to the

prohibition of disposal with domestic waste. The

designations for the decisive heavy metals are:

Cd=cadmium, Hg=mercury, Pb=lead. You may return

spent batteries/accumulators free of charge to the

recycling centres, our outlets or anywhere else

where batteries/accumulators are sold.

ACT-7T Wireless Microphone

User Guide

2 CE2 4 3

Design & specifications are subject to change without prior notice

AS100510

Electronics Co., Ltd.

Headquarters: 814 Pei-Kang Road, Chiayi, 60096, Taiwan.

http://www.mipro.com.tw

E-mail: mipro@mipro.com.tw

Summary of content (6 pages)

PAGE 1
Disposal Dispose the unusable device according to valid regulations. Disposal of spent batteries/accumulators You are required by law to return all spent batteries. Disposing of used batteries with domestic waste is prohibited! 2005-08 -13 Batteries / NiCad cells containing toxins are marked by accompanying symbols that refer to the prohibition of disposal with domestic waste. The designations for the decisive heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead.
PAGE 2
Bodypack Transmitter Finely crafted and ergonomically designed ACT-7T adapts magnesium alloy housing, LCD panel, and high-efficient transmitting circuit design with low spurious showcases MIPRO's professional style. Bodypack Transmitter 3. 4. 5. 6. 7. 8. 1. PARTS NAME AND FUNCTIONS 9. 1 10. 2 3 4 GROUP CHANNEL BAT 5 6 10 7 8 9 (Fig .1 ) 1. 2. AF Input Jack: Connects to either a lavaliere or a headset microphone.
PAGE 3
Bodypack Transmitter 2. OPERATING INSTRUCTIONS FURNISHED ACCESSORIES: 1. To adjust GT/MT Switch (9), and Gain Control (7), simply push down both snap locks on the sides of battery cover and flip it backwards to expose the adjustment panel. 2. The LED indicator flashes briefly when power on indicating normal battery status. If no flash occurs it has either no battery, the battery is drained or installed incorrectly. Change accordingly. 3.
PAGE 4
Bodypack Transmitter 3. AF INPUT CONNECTIONS Bodypack Transmitter 4. FUNCTIONS OF LCD DISPLAY GROUP CHANNEL BAT ERR (1) 2-Wire Electret condenser microphone Capsule PIN 1 SHIELD AUDIO 2 1. ERR Message: When "ERR" appears, it means "Operation Error". Please refer to the following codes to diagnose which error you are experiencing. 4 1 3 2 3 4 ERR no01→EEPROM is not being programmed or internal data error. (2) 3-Wire Electret condenser microphone Capsule ERR no02→For testing only.
PAGE 5
Bodypack Transmitter 4. Battery Status: Bodypack Transmitter 5. B AT T E RY I N S TA L L AT I O N 1. Pushing down both snap locks on the sides of battery cover to open battery cover. Take out the batteries. Fig.(3). 100% 80% 40% 10% 0% Battery Status: When the battery has less than 10% power remaining, batteries must be replaced. If undervoltage continues, LCD will show "PoFF" and shut down the system to avoid battery being over-discharged. 2. Insert two 1.
PAGE 6
THIS DEVICE COMPLIES WITH PART 74 OF THE FCC RULES AND RSS-123 Issue1 OF CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.