User's Manual

ManualsBrandsMipro Electronics ManualsElectronicsHandheld Transmitter Microphone

Table Of Contents

ACT-30Hr

ACT-30H

Handheld Transmitter Microphone

User Guide

MIPRO Electronics Co., Ltd.

Headquarters: 814 Pei-Kang Road, Chiayi, 60096, Taiwan.

Web: www.mipro.com.tw

E-mail: mipro@mipro.com.tw

As110215

Design and specifications are subject to change without prior notice

2CE401A

Summary of content (7 pages)

PAGE 1
Handheld Transmitter Microphone User Guide MIPRO Electronics Co., Ltd. Headquarters: 814 Pei-Kang Road, Chiayi, 60096, Taiwan. Web: www.mipro.com.tw E-mail: mipro@mipro.com.
PAGE 2
Handheld Transmitter Handheld Transmitter Contents Profile 1 Profile 2 Key Features 3 Handheld Controls and Indicators 5 Operating Instructions for Insertion & Removing Battery 6 Operating Instructions 7 Lcd Screen 8 Battery Status 9 General Tips for Improving System Performance There are two types of antenna design for the handheld transmitter microphones “built-in” and “external”.
PAGE 3
Handheld Transmitter Handheld Transmitter Key Features Handheld controls and indicators ! Proprietary anti-dismantle design prevents the separation of the microphone grille from the microphone housing. ACT-30Hr ! The microphone capsule is connected to the transmitter PCB and then screwed onto the housing to prevent the potential malfunction caused by improper contact. GROUP CHANNEL BAT 1 ! Modularized PCB and microphone capsule can be easily detached and assembled.
PAGE 4
Handheld Transmitter Housing: Upper portion connects to the microphone capsule module. Internally it holds the transmitter PCB and battery compartment. 6 8 9 10 Operating instructions for Insertion & removing battery Lockable On/Off Switch: Slide the switch to the “ON” position after power-on to avoid accidental power off during performance. Slide the switch to “OFF” position before power-off and conserve battery power.
PAGE 5
Handheld Transmitter Handheld Transmitter Operating instructions LCD Screen 1. LCD screen on the transmitter and the RF level/indicator shown on the receiver will be lit when the microphone is turned-on, denoting normal status. A blank LCD screen maybe due to an incorrect battery polarity orientation. GROUP CHANNEL BAT ERR !ERR Message: When “ERR” appears in the display it indicates that an operational error has occurred.
PAGE 6
Handheld Transmitter Handheld Transmitter Battery Status General tips for improving system Performance 1. Performer should avoid holding the microphone over or near the antenna section as this will deteriorate transmission efficiency. Severe deterioration if performer directly covers up the antenna section with both hands. 100% 80% 40% 10% 0% Indicates the power remaining in the transmitter battery. When the battery has less than 10% power remaining it must be replaced or recharged.
PAGE 7