ADD-ON DEVICE Quickstart Guide Outdoor External Strobe Siren Model No. OSR1300 What's inside: 1x Outdoor External Strobe Siren 1x Power Adapter Mounting Accessories Broadband internet connection, iOS or Android phone and home router required.
English Diagram of PCB Board 1 . Status / Alarm Strobe Lens 2. Siren LED 3. Built-in Siren 4. Tamper Switch 5. Adapter Interface 6. Backup Battery 7 . Arm / Disarm prompt on / off Jumper 8. Siren Volume Jumper 9 . Siren Time Jumper 10. Wired Block 1 1 .
English Jumper Setup On (as default) Off Arm/Disarm Prompt 30s (as default) 2 mins 5 mins High Volume (as default) Mute Low Volume Siren Alarming Duration Siren Volume
English Step 1: Assemble your device and accessories 1 . Unpack your device and accessories. 2. Pair the device with the Security Shuttle within 1-10 feet to make sure the connection is working well. 3. Plug the Siren into power outlet. 1-10 ft 1-10 ft Step 2: Add a device 1 . Open the app, tap on the menu button " " and select "Device Management". 2. Press the add button "+" next to Sensor List. 3. Follow the app instructions to scan the QR code located on the device.
Choose a suitable position on an external wall, as high as possible, where the siren can be easily seen and out of easy reach of any potential vandal. 0mm 1 Make sure the Tamper Switch can be fully depressed against the wall. 2 Using the mounting template provided. 3 Drill in the three places indicated. 4 Plug the Siren into power outlet. 5 Mount the siren to the wall and make sure it is well positioned.
Troubleshooting Tips Are your devices listed in your app? If you’re having trouble installing your devices, see if they’re listed in your app: • Navigate to > Device Management to see if all your devices are listed. • Tap + next to the device category and follow the on-screen instructions to add any missing devices. Are your devices communicating with Security Shuttle? • If your devices don’t connect to Security Shuttle, they might be too far away.
