User's Manual

Minwa China (Huizhou) Electronics Co., Ltd
Page 1 of 2
Version: 2017-7-3
Minwa China (Huizhou) Electronics Company Limited
Huizhou Industrial Park, Minwa (Dalian) Industrial Park, Ru Hu Town,
Hui Cheng District, Huizhou City, 516169, China.
Smart socket Model: MW RCAC01EL
Remote controller model: RC01EL
Introduction
This product has power switch button and wireless remote controlling ON/OFF function. You can
long-distance open or close your electrical equipments. Such as fan, TV, light etc.
Technical Specification
Input: 120V AC 15A 60Hz
Output: 120V AC 15A 60Hz
Instruction
Please read the following instructions step-by-step before using the product.
1) Plug the smart socket into a wall socket.
2) Press the remote control up/down button to select the channel (1-6), you can control the
matched smart socket.
3) Connect your equipment to the smart socket.
4) You can also press the power switch button on the smart socket for ON/OFF.
5) Blue LED indicator on the product indicates power switch ON/OFF.
How to match the remote control and smart socket?
1) Plug the smart socket in to the wall socket, press the power switch button about 5
seconds until the LED indicator flashes.
2) Press the remote control up/down button to select the channel (1-6), and press ON or OFF
button, then the LED indicator flashes faster, release the ON or OFF button after LED
indicator stop flashing. The socket is now ready to use the remote control.
3) Check the remote function if match successfully. Press the matched channel button, the power
LED indicator shall switch ON/OFF, if not working, please repeat step 1-2.
4) Please don’t change the channel under matching process, it might be cause matching failed.
Warning
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,