User's Manual

Minwa China (Huizhou) Electronics Co., Ltd

Page 1 of 3

Version: 2016-11-23

Minwa China (Huizhou) Electronics Company Limited

Huizhou Industrial Park, Minwa (Dalian) Industrial Park, Ru Hu Town,

Hui Cheng District, Huizhou City, 516169, China.

Model: MW BTAS01EL

Introduction

This product with blue-tooth function, you can control ON/OFF by smart phone.

Technical Specification

120V~ 60Hz 15A Resistive

Instruction

Please read the following instructions step-by-step before using the product.

1.) You can search “bulbMesh” in APP Store or Google play to down load APP.

2.) Connect this product to main power supply.

2.1) Connect your equipment to this product

2.2) Open the APP to connect this product.

2.3) You can control ON/OFF by smart phone or the power button on the product.

How to connect this product by APP

1) Open the blue-tooth of your smart phone.

2)Open APP, and select AC plug。 3) Click ”+” to add a new smart switch

PAGE 1
Minwa China (Huizhou) Electronics Co., Ltd Page 1 of 3 Version: 2016-11-23 Model: MW BTAS01EL Introduction This product with blue-tooth function, you can control ON/OFF by smart phone. Technical Specification 120V~ 60Hz 15A Resistive Instruction Please read the following instructions step-by-step before using the product. 1.) You can search “bulbMesh” in APP Store or Google play to down load APP. 2.) Connect this product to main power supply. 2.1) Connect your equipment to this product 2.
PAGE 2
Minwa China (Huizhou) Electronics Co., Ltd Page 2 of 3 Version: 2016-11-23 4) Find a new device 5) Select the device, this unit connected successfully. 6) You can control the unit ON/OFF by APP. Minwa China (Huizhou) Electronics Company Limited Huizhou Industrial Park, Minwa (Dalian) Industrial Park, Ru Hu Town, Hui Cheng District, Huizhou City, 516169, China.
PAGE 3
Minwa China (Huizhou) Electronics Co., Ltd Page 3 of 3 Version: 2016-11-23 How to restore factory setting Press the power button over 5 seconds. If you need connect to your smart phone again please repeat above steps. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.