Carpet Spotter OPERA TION OPERATION Revised 9/05 SERVICE Model: C46200-00 C46200-02 C46200-02CE PAR TS ARTS CARE
FOR COMMERCIAL USE ONL Y ONLY IMPOR TANT SAFETY INSTRUCTIONS IMPORT When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING WARNING - To reduce the risk of fire, electric shock, or injury: • Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. WARNING To reduce the risk of electrical shock, do not expose to rain. Store indoors.
INSPECTION Carefully unpack and inspect your machine for shipping damage. Each unit is tested and thoroughly inspected before shipment, and any damage is the responsibility of the delivery carrier who should be notified immediately. ELECTRICAL - Model C46200-00 (1 15V) (115V) This machine is designed to operate on a standard 15 amp. 115 volt, 60 hz, AC circuit. Voltages below 105 volts AC or above 125 volts AC could cause serious damage to the motor.
USER MAINTENANCE INSTRUCTIONS All service and repair should be performed by qualified vacuum service representative or electrician. No user serviceable components are employed in the electrical vacuum lid head assembly. No lubrication of the motor is required. DAIL Y MAINTENANCE DAILY 1. Solution tank should be emptied after each use. Flush pumping system with 1 gallon of clean water after use. 2. Check and clean vacuum inlet and solution inlet strainer daily. 3.
OPERA TING INSTRUCTIONS OPERATING 1. Lift the recovery tank of solution tank by releasing the two latches. 2. Add up to 1 1/2 gallons of hot water (maximum 140°F) to the solution tank. If chemicals are required, follow dilution ratios as specified on product label. Use only commercially available cleaning chemicals intended for use on carpet. 3. Place recovery tank back on solution tank and fasten the two latches. 4. Plug power cord into grounded wall outlet. 5.
BEFORE EACH USE OF THE CARPET SPOTTER: 5
6
Part s Listing - 120V & 240V Parts Item 1 2 3 4 5 5A 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 34A 35 36 37 37A 38 39 39A 40 41 42 43 43A 44 44A 45 46 47 48 49 50 51 51A 52 Part No Qty 150004 1 380064 1 410-4419AA 2 450040 1 450213 1 450235 1 450222 1 450226 2 450227 1 450228 1 450247 1 450251 1 450252 1 450253 1 450254 1 452037 1 710207 1 711104 2 711124 1 711301 1 711400 1 711504 6 711553 1 712532 4 712537 1 712543 4 712560 2 712638 8 712770 2 712905 2 712908 1 71
450220CE 230V European Part s Listing Parts Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Part No 150004 380064 410-4419AA 450040 450213CE 450222 450226 450227 450228 450247 450251 450252 450253 450299 452037 710207 711124 711301 711304 711400 711504 711553 712532 712537 712543 712560 712638 Qty 1 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 3 1 2 1 6 1 4 1 4 2 4 Description Heyco Stain Relief Foam Ring Pop Rivet Elbow PLT 3/8 MPT x 3/8 Barb Frame Weldment Elbow PLT 3/8 MPT x 1/4 Barb Whe
Part s Listing Parts ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PAR T NO QTY ART 000708 .
Optional Cart 450240 Optional Spotter Kit 902000 Part s Listing Parts ITEM 1 2 3 4 5 6 7 8 9 10 PAR T NO ART 130032 280016 450238 450239 711350 711375 711508 712546 900008 902000 QTY 2 1 1 1 2 1 1 2 2 1 DESCRIPTION Hub Cap 3” Caster Handle Weldment Frame Weldment Nut 10-32 Nyloc Nut 3/8-16 Nyloc WSR .44 x 1.0 x .09 SCR-MC 10-32 x 1.
Spotter Tool Complete 450250 Part s Listing Parts ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PAR T NO ART 390049 390052 390053 390054 390055 390056 390059 390060 390061 390062 390063 390064 390066 450248 711803 712320 712545 712636 450249 450210 450211 450218 450219 450223 828062 830082 QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 2 DESCRIPTION Spring Body Trigger Valve Stem, Brass Cap, Valve Mount Nozzel O-Ring, Seal Valve O-Ring, Valve Stem O-Ring, Valve Seat Pin Coupling Solution V
12
13
LIMITED W ARRANTY WARRANTY Minuteman International, Inc. warrants to the original purchaser/user that this product is free from defects in workmanship and materials under normal use and service for a period of one year from date of purchase. In addition, Minuteman International, Inc. will, at its option, honor labor warranty claims for the first 12 months from date of sale, provided such claims are submitted through and approved by factory authorized repair stations. Minuteman International, Inc.