Installation Guide

ManualsBrandsMinka Lavery ManualsLightingHarbor View 4-Light Black Outdoor Lamp Post with Clear Seeded Glass

INSTALLATION INSTRUCTIONS

Model# 71266-66

READ AND SAVE THESE INSTRUCTIONS

W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

PREPARING FOR INSTALLATION (Fig. 1)

1. Shut off power at the fuse box or circuit breaker box and remove the

old fixture including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts in a clear

area. Take care not to misplace any small parts necessary for

installation.

3. Separate the base cup (C) by loosening screws (D, 4pcs).

4. Connect electrical wires while supporting the lantern with connectors

(E). If your post (A) (not supplied) has a ground wire (green or bare

copper), connect the fixture ground wire to it. If not, consult your

electrician for proper grounding. After wires are connected, tuck them

carefully inside the base cup (C). Align the base cup (C) with post (A)

and secure with mounting screws (B). (Fig.1&2)

5. Install (4) four candelabra base bulbs (I) up to 40 Watts, or CFL or LED

equivalent (not included), in accordance with the fixture specification.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING) (NE PAS

DEPASSER LA )

6. Attach the frame (F) onto the base cup (C) by using screws (D,4pcs).

7. To replace the glass, remove gaskets (M,8pcs) and loosening the

screws (L,8pcs) to remove cover (K). Insert the new glass (J) into the

fixture frame from the bottom. Secure the lower cover (K) by screwing

screws (L,8pcs) until tight and reinstalling gaskets (M,8pcs) on the

lower cover (K).

8. This fixture is ETL listed for wet location applications.

Your installation is now complete. Return power to the outlet box and test

the fixture.

Fig. 1

BAR E CO PPER(GRO UND)

Fig.2

FIX TURE

WIRES

WHITE

BLACK

(HOT)

WIR ES

HOUSE

GRE EN O R

WHI TE

(NE UTRA L)

WIR ES

HOU SE

(GR OUND)

COPPER

BARE

FIX TURE

WIR ES

BLACK

WIRES

FIX TURE

GREEN O R

HOUSE

WIR ES

“CAUTION-RISK OF FIRE CONSULT A QUALIFIED

ELECTRICIAN TO ENSURE CORRECT BRANCH

CIRCUIT CONDUCTOR”

ATTENTION – RISQUE D’INCENDIE, CONSULTER UN

ÉLECTRICIEN QUALIFIÉ POUR VOUS ASSURER QUE LES

CONDUCTEURS DE LA DÉRIVATION SONT ADÉQUATS.

Candle cover:CCV21090PA-66