Instructions / Assembly

Fig.1
INSTALLATION INSTRUCTIONS
Item#2371-77(New.09/10/2017)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 2
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the fixture from the carton and
check that all parts are included as shown in the
illustration.
2. Shut off power at the circuit breaker and remove old
fixture including the mounting hardware.
3. The mounting bracket (E) contains several pairs of
threaded holes, find the pair of holes that match the
holes spacing in your Junction box.
Attach the
mounting bracket (E) to the Junction Box using the
two junction box screw (A) ( size: 8/32*25mm).
Tighten the screws (A) securely with screwdriver.
The side of crossbar marked “GND” must face out.
CONNECTING THE WIRES (Fig. 2)
4. At this point, connect the electrical wires as shown in
(Fig.2), Make sure that all wi
re connections are
secured. If your outlet has a ground wire (green or
bare copper), connect the fixtures Ground Wire to it.
Otherwise, connect the fixture Ground Wire directly
to the circular strap using the Green Screw.
5. Position the back plate (H) to line up the holes on
the mounting bracket (E) then secure with the
mounting screws balls (C).
INSTALL LIGHT BULB (Fig. 1)
6. Install light bulb (D) (not included) in accordance
with the fixture’s specifications.
(DO NOT EXCEED THE
MAXIMUM WATTAGE RATING!!) (NE PAS DEPASSER LA
PUISSANCE NOMINALE MAXIMALE!)
FINISH THE INSTALLATION (Fig. 1)
7. Your installation is complete now. Return power to
the junction box and test the fixture.
Note: Illustration
(Fig.1) on this manual is for installation purposes only. It
may or may not be identical to the fixture purchased.
2371-77
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
- Set #A-022-173300
- Mounting bracket
-Ground Screw
-Mounting Screw*2
E
F
A
D
H
C
22*22
10PCS
GC2341-4
MIN 75
℃
SUPPLY CONDUCTORS