MBGS Minibrew User Actions This booklet shows all user steps from the app iOS version 1.0.
Index Gravity Sensor 3 Gravity Sensor (1) 3 Gravity Sensor (2) 4 Prepare Fermentation 5 Wash Hands 5 Sanitize Items (1) 5 Sanitize Items (2) 6 Open Smart Keg 6 Open Yeast 7 Pitch Yeast 7 Placing Gravity Sensor 8 Close Smart Keg 8
Gravity Sensor Gravity Sensor (1) Shake your gravity sensor vigorously until it flashes red. Gravity Sensor (2) Once the gravity sensor is flashing, place it next to your smart keg. When your gravity sensor is finished pairing this window will close automatically.
Prepare Fermentation Wash Hands Thoroughly wash your hands with soap.
Sanitize Items (2) Spray a generous amount of disinfectant onto the closed yeast bag, gravity sensor and scissor. Open Smart Keg First, spray a generous amount of disinfectant onto the Smart Keg lid. Then unlock keg lid and hold open. Ensure that it does not come into contact with anything.
Open Yeast Open yeast bag with scissors. (In the following steps, it is important to minimize the amount of time that the keg lid stays open to prevent infection).
Placing Gravity Sensor Place the paired gravity sensor inside the keg. Close Smart Keg Immediately close Smart Keg lid.
FCC regulatory conformanceļ¼ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.