MINI PRINTER Quick Start Guide （Ver.1.
Package Printer User Manual Product View Printing Paper USB Cable
How to Use Power ON/OFF Long press 2 seconds to Power ON/OFF Indicator light on: Normal running/ Full charged Indicator light flash quickly: Error running（Lack of paper， Low battery Indicator，Printing head overheating） Indicator light flash slowly :Charging Charge Please plug the device into the USB cable and connect it to adapter or the computer for charging before the first time.
*The product is sold without a power adapter. In the user manual stated if consumers use a p ower adapter for power supply, they should bu y a matching power adapter that has obtained CCC certification and meets the standard requi rements. Reset When the device does not respond, try to insert the pin/toothpick into the reset hole for 3 seconds and then release.
Download “iLabel”APP User can scan below QR or search “iLabel” in APP Store/Google Play to download. (Android 4.3 or above and iOS 9.0 or above) After power on, double click the button to print QR code, scan the code to download “iLabel” APP.
Connect to print 1. Turn on the phone Bluetooth and the APP, allows applications to gain access (photos, media, files etc) of the phone. 2. Then register and login in the APP, connect the device by scan the same QR code printed before.
Replace the Thermal Paper 1. Follow the arrow direction to slide and open the device. 2. When replacing, insert the thermal paper. Please attention, the new thermal paper needs to expose the length of the paper 2cm, so that the machine can automatically absorb paper when loading the paper.
3. Cover the device. ※ Do not touch the print head to avoid scalding when changing the printing paper after printing.
This product is with built-in lithium battery, please do not use it higher than 40 ℃, do not close to the fire and other sources of heat, do not placed in the hot sun. Do not remove, impinge, puncture or modify the battery. Do not use the battery for other purposes. Do not put the product in fire or water to avoid short circuit of the battery causing fire or burns.
A：When adding the device, please check whether the power of the device is enough to work. Q：The device can not print. How to do? A：① Confirm whether the Bluetooth of the mobile phone is on, and exclude the possibility of others connecting to this device. ② Check whether the thermal paper has been used up, timely replacement of the printing paper. ③ Printing head is overheating, if overheating, please let the printing head cool before trying to print.
Q： Why the printed getting lighter? A： ① Check whether the device is low battery. ② Check whether the printing head and wheel is covered with carbon ink, please wipe with alcohol softly. Q： Why does the adhesive paper fail to print out? A： Please pull the adhesive paper out 2cm.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
