Product Info

ManualsBrandsMINEW ManualsElectronicsDoor Sensor

MiniBeaconPlus Configuration Instruction

TEL: +86-755-2103 8160

EMAIL: sales@minewtech.com

URL: www.minewtech.com

MiniBeacon

Plus

Configuration

Instruction

V2.

Note:

The

instruction

applied

for

beacon

models

that

doesn

’

load

any

sensors

and

pre-flashed

MiniBeacon

Plus

smart

firmware.

MiniBeacon

Plus

one

Minew

’

software

patent.

PREPARATION------------------------------------------------------------------------------------------------------------------------------- 2

ENTER INTO CONFIGURATION MODE-------------------------------------------------------------------------------------------- 2,3

CONFIGURATION MODE----------------------------------------------------------------------------------------------------------------- 4

Settings Definition----------------------------------------------------------------------------------------------------------------------- 4

SLOT Configuration------------------------------------------------------------------------------------------------------------------ 4,5

Advertising Data Format (Info)-------------------------------------------------------------------------------------------------------6

Adv Content------------------------------------------------------------------------------------------------------------------------------ 7

Base params---------------------------------------------------------------------------------------------------------------------------- 7,8

Trigger------------------------------------------------------------------------------------------------------------------------------------ 8

，

DEPOLYMENT NOTICE------------------------------------------------------------------------------------------------------------------ 14

END------------------------------------------------------------------------------------------------------------------------------------------- 14

Summary of content (15 pages)

PAGE 1
MiniBeaconPlus Configuration Instruction MiniBeacon Plus Configuration Instruction V2.1 Note: 1. The instruction applied for beacon models that doesn’t load any sensors and pre-flashed MiniBeacon Plus smart firmware. 2. MiniBeacon Plus is one of Minew’ Minew’s software patent.
PAGE 2
MiniBeaconPlus Configuration Instruction PREPARATION 1. Activate beacon device as the datasheet correctly; 2. An iOS 7.0+ / Android 4.3+ smart device with BLE 4.0; 3. Download BeaconSET+ app from Apple store or Google Play; ENTER INTO CONFIGURATION MODE 1. Run BeaconSET+, there are total 37 devices detected around smartphone immediately, see image 2; 2.
PAGE 3
MiniBeaconPlus Configuration Instruction 3. For example: Slide the RSSI slide bar to set the RSSI value at -33 dBm as the filter, then see image 4; there is only one beacon and its MAC address is ac233f24a933 which we want to configureit. 3.1 The beacon (MAC ID: ac233f24a933) can advertise total 6 different frame types iBeacon, Eddystone (UID, URL, TLM), Acc. and Info simultaneously. But now the beacon advertises only URL, iBeacon and Info frame. 3.
PAGE 4
MiniBeaconPlus Configuration Instruction CONFIGURATION MODE 1. Settings Definition SLOT: Each Beacon has 6 configurable SLOTs; it is from SLOT1 to SLOT6. Connectable: Each Beacon has 2 different advertising statuses, connectable and disconnectable. Only when the advertising status is connectable, the Beacon is configurable. But the disconnectable advertising saves about 20% power consumption than connectable advertising’s.
PAGE 5
MiniBeaconPlus Configuration Instruction 8 2.1.1 NO DATA If setting a SLOT’s frame type to NO DATA, It means that SLOT no data to be advertised. The Beacon will STOP advertising that SLOT. 2.1.2 iBeacon The UUID, major and minor values provide the identifying information for the iBeacon. 2.1.3 UID Unique and static ID consists of 10-byte Namespace and 6-byte Instance component. The UID is required if the user want to register Beacon into Google dashboard. 2.1.4 URL A compressed encoding format (max.
PAGE 6
MiniBeaconPlus Configuration Instruction 2.2 Advertising Data Format (Info) The advertising data packet of Info is defined by MINEW. Here below is the completed data format and definition as below table.
PAGE 7
MiniBeaconPlus Configuration Instruction 2.3 Adv. Content Here below are the default factory settings of Adv. Content for the Beacon. Frame Type iBeacon UID URL TLM Info Ref. Image# Adv. Content Default Setting UUID Major Minor Instance ID Namespace ID URL TLM Beacon Name MAC Address Battery Level E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 0 0 random random https://www.minewtech.com It’s not configurable. It’s not configurable. 10 10 11 12 4 4 11 12 2.
PAGE 8
MiniBeaconPlus Configuration Instruction Frame Type iBeacon UID URL TLM Info Adv. Interval (ms) 900 2000 2000 4000 4000 RSSI@1m (dBm) -59 --------- RSSI@0m (dBm) ---24 -24 -24 -24 Radio Power (dBm) 0 0 0 0 -8 Adv. Interval: Advertising interval; RSSI: Measured power, it’s used for the calibration and calculating relative distance. Radio Power: Transmission power; 2.
PAGE 9
MiniBeaconPlus Configuration Instruction 2.5.2 Detailed Process of Configuration Trigger condition refers to the condition that a certain advertisement frame of the device needs to meet to start advertising. The general trigger conditions are: double click and triple click. These trigger conditions can be set in any channel (advertisement frame). Note: the above trigger conditions can only be set when there are buttons on the device. Other trigger conditions are only available with related sensors: 1.
PAGE 10
MiniBeaconPlus Configuration Instruction The "always advertise" button only works when the trigger is enabled. Its function is to determine whether the device continuously advertises. After the trigger is enabled, the device will advertise iBeacon frames all the time when the button is turned on. The relevant parameters of the advertisement are the programming default parameters.
PAGE 11
MiniBeaconPlus Configuration Instruction Configure the trigger condition of the second data frame as "Button double tap" and set the trigger duration,which means when the user double clicks the button, the channel data will be advertised. The time of each advertisement is the trigger duration previously configured by the user (as shown in the figure below, which is configured as 30 seconds). The Adv interval, Radio Txpower and RSSI are the base params (respectively 900ms、0dBm、-59dBm) .
PAGE 12
MiniBeaconPlus Configuration Instruction Above v2.2.6x The user can click to "Always advertise" when the trigger is on, and the advertisement will continue normally even the trigger condition is not reached. The advertisement interval is the one in the base params; turn on the trigger to reach the trigger condition and trigger the advertisement, and the advertisement interval conforms to the advertisement interval configuration in the trigger configuration.
PAGE 13
MiniBeaconPlus Configuration Instruction Configure the trigger condition of the second data frame as "Button double tap" and set the trigger duration as well as clicking to "Always advertise" . If the user does not double click the button, the channel data will also be advertised.
PAGE 14
MiniBeaconPlus Configuration Instruction DEPLOYMENT NOTICE 1.1 For better security performance and lower battery power consumption, we strongly recommend making the beacon works at DISCONNECTABLE status; 1.2 The less activated SLOT, the more battery power saving; 1.3 The smaller transmission power, the more battery power saving; 1.4 The larger advertising interval, the more battery power saving; 1.5 The higher the deployment position is, the larger advertising range; 1.
PAGE 15
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.