WRN BLE Module User Manual
Features: Bluetooth® 5, IEEE 802.15.4-2006, 2.4 GHz transceiver. LED for user interaction. Support SEGGER J-Link debug interface. CE/FCC/IC compliant.
Hardware Specifications: Bluetooth 5.0 Low Energy Standard: Transmit Power: IEEE 802.15.4 -40 to +10 dBm Frequency Band: Receiver Sensitivity: 2.402GHz to 2.480GHz -95 dBm sensitivity in 1 Mbps CH: 0~39 Bluetooth® low energy mode Frequency Spacing: 1MHz Supported data rates: Antenna: 1 Mbps MMCX connector *1 Power: CPU: DC 3.
Software Specifications: Beacon Transmit Configuration: Beacon Scan Configure iBeacon/Eddy stone / Scan and receive BLE beacons. customized Beacon.
Specification Table Item Description Type BLE Module Size(mm) 28.5 mm * 26.4mm Weight(g) <5 g Power Supply DC 3.3V Antenna 1 external antenna Bluetooth Port Bluetooth 5.
BLE Module Outward Number Description 1 J-Link Interface 2 LED 3 Antenna Connecter 4 RF Debug Connector 5 Shield Can 6 External Interface
Final Product Sample Example
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Industry Canada (IC) CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme RSS d'Industrie Canada.
Federal Communications Commission (FCC) Interference Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE.
If the final host / module combination is intended for use as a portable device (see classifications below) the host manufacturer is responsible for separate approvals for the SAR requirements from FCC Part 2.1093 and RSS-102.
Simultaneous Transmission Evaluation This module has not been evaluated or approved for simultaneous transmission as it is impossible to determine the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous transmission condition established through module integration into a host product must be evaluated per the requirements in KDB447498D01(8) and KDB616217D01, D03 (for laptop, notebook, netbook, and tablet applications).