User's Manual

ManualsBrandsMine Site Technologies ManualsElectronicsET33 Tag

Table Of Contents

Table of Contents
Statement
General Information
Physical map
Component function
Performance index
Accessories
General attention
Warranty conditions
FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure StatementThis device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

MineSiteTechnologiesPtyLtd

ET33 tag use’s manual

version number： V1.0

Mine Site Technologies Pty Ltd



Summary of content (10 pages)

PAGE 1
Mine Site Technologies Pty Ltd ET33 tag use’s manual version number： V1.
PAGE 2
Mine Site Technologies Pty Ltd Table of Contents Statement ................................................................................. 3 General Information ................................................................... 3 Physical map ............................................................................ 4 Component function .................................................................. 4 Performance index .....................................................................
PAGE 3
Mine Site Technologies Pty Ltd Statement Thank you for using this electronic product of our company. In order to let you experience the product swimmingly, detailed instruction is provided which you can find the product’s introduction, usage and other information. Before using this product, please read the manual carefully, so that you can correctly use it. In case of any printing or translation error, we apologize for the inconvenience. As for the content change, we are sorry for no further notice.
PAGE 4
Mine Site Technologies Pty Ltd container port. Physical map ET33 Tag physical map as follows. Component function  LED light：After press button and low voltage alarm.  Button：Alarm.
PAGE 5
Mine Site Technologies Pty Ltd Performance index Mechanical Structure Index Item Name Specific parameters 1 Size 124mm X 57mm X 28mm 2 Weight 124g Electrical Performance Index Item Name Specific parameters 1 Power supply Battery 2 Rated voltage DC 3.0V～4.2V Transmitter 3 Working frequency frequency:2.4GHz; Receive frequency:125KHz 4 Communication IEEE 802.11b protocol 5 Transmitter frequency Adjust 6 Low voltage alarm ≤3.
PAGE 6
Mine Site Technologies Pty Ltd Accessories 1. Tag. 2. A set of Use’s Manual & warranty card. General attention 1.To avoid degaussing, please keep the tag away from the magnetic materials, such as disk, credit cards, etc., to ensure that the tag is not contact with any liquid. Do not bump,shake or throw the tag in case of malfunction or lighting a fire. Do not put tag on microwave oven or high-tension apparatus to avoid circuit damage and fire accident.
PAGE 7
Mine Site Technologies Pty Ltd Warranty conditions For any defect, in the judgment of our technician, caused under normal use, we are responsible for repairing free of tages one year commencing from the date of purchase at the discretion of our company. A valid warranty card and original purchase invoice must be presented upon request of warranty service.
PAGE 8
Mine Site Technologies Pty Ltd FCC Statement This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are designed to provide reasonable protection again st harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 9
Mine Site Technologies Pty Ltd — Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth f or an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
PAGE 10
Mine Site Technologies Pty Ltd erference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operat e the equipment.