User Manual

Switch wireless controller using manual

Switch mode connection :

1）First time connect：turn one the switch console to connect to the Bluetooth

interface.Press Home button on the controller for 5 seconds to enter Bluetooth

search mode,LED1-LED4s flash quickly, after connect successfully,the

corresponding led light remain on!

2）Second time connect：Press Home button on the controller for 3 seconds to

enter Bluetooth search mode,LED1-LED4s flash quickly, after connect

successfully,the corresponding led light remain on!

Note：When using the controller, the "Bluetooth function" and "pro wired function"

of the switch console must be” on “to use the controller normally)

PC Mode connection:

1) Connect the controller to the PC with the USB cable, XINPUT will be the default

mode; LED2 is remain on!

2)From Xinput mode Long press 'O(screeshot)"button for 2s can change to D input

mode ,LED 3 solid on.

Led light Charge:

1）Controller off：4 LEDs lights flash slowly when charging, fully charged will off!

2）Connecting to console：4 LEDs lights flash slowly when charging, fully charged

will off!

PAGE 1
Switch wireless controller using manual Switch mode connection : 1）First time connect：turn one the switch console to connect to the Bluetooth interface.
PAGE 2
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.