OPERATOR'S MANUAL Cat. No. TSS 1000 FOLDING TABLE SAW STAND WARNING To reduce the risk of injury, user must read and understand operator's manual.
SPECIFIC SAFETY RULES TABLE SAW STAND Read all safety warnings and all WARNING instructions provided with the ta- ASSEMBLY assemble the table saw WARNING Properly stand before mounting the tool. Proper assembly is important to ensure stability. ble saw stand and the table saw to be mounted. Legs must match with corresponding number Failure to follow the warnings and instructions may indicators on the stand. Assembling the Stand Save all warnings and instructions for future reference.
Installing the Table Saw Tab 2 1 Latch Rear Brackets 3 1. Hook the back of the saw into the rear brackets. 2. Lower the front of the saw onto the frame. 3. Secure the latch onto the saw's front tab. level the table saw stand WARNING Properly before each use. If the table saw stand can shift or rock, the table saw or workpiece cannot be safely controlled. Leveling 1. Loosen the locking nut. 2. Screw in or out the foot to level the stand. 3.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. AUSTRALIA AND NEW ZEALAND MILWAUKEE ® Service MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.
