OPERATOR'S MANUAL Cat. No. 0;) '5 0; )8(/ &203$&7 &25( '5,// 67$1' WARNING To reduce the risk of injury, user must read and understand operator's manual.
tions provided with this power tool. Failure to follow all instructions listed below may result in Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. •Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• Do not use this tool if you do not understand these excessive temperature. operating instructions or you feel the work is beyond above 130°C (265°F) may cause explosion. your capability; contact Milwaukee Tool or a trained •Follow all charging instructions and do not charge professional for additional information or training. the battery pack or tool outside the temperature •Maintain labels and nameplates. These carry Charging im- important information.
Attaching Wheel Assembly (Optional) SPECIFICATIONS Cat. No. .............................................. MXF DR150 Vacuum Pump ..................................... 49-50-0200 Gasket Kit ............................................ 43-44-0019 2 SYMBOLOGY Read operator's manual Always wear eye, hearing, and respirator protection Regulatory Compliance Mark (RCM). This product meets applicable regulatory requirements.
. Extend the center pointer(3) and align it with OPERATION center of the hole to be drilled. To reduce the risk of injury, always 6. the Tighten the anchor nut securely. WARNING wear proper eye protection marked 7. Retract the center pointer. to comply with ANSI Z87.1. Assembling and Using a Vacuum System When working in dusty situations, wear appro(Optional) For Horizontal (Floor) Coring priate respiratory protection or use a suitable reduce the risk of injury always dust extraction solution.
9. When done, use the feed handle to raise the bit clear of the hole and turn off the drill. reduce the risk of injury always WARNING To secure the stand to the work sur- face to help prevent personal injury and to protect the stand. An unsecured stand could rotate during coring and possibly cause injury. Never rely on the shoring pin alone for securing. MAINTENANCE reduce the risk of injury, always WARNING To remove the machine and all accessories before performing any maintenance.
Cleaning Keep handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean, since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around machines. Repairs For repairs, return the stand to the nearest service center.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy DutyTM. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.