OPERATOR'S MANUAL Cat. No. MXF COSC MX FUEL™ 14" CUT-OFF SAW CART WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL SAFETY WARNINGS all safety warnings, instrucWARNING Read tions, illustrations and specifica- attached to a rotating part of the power tool may result in personal injury. •Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. •Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
to another. Shorting the battery terminals together may cause burns or a fire. •Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. •Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire explosion or risk of injury.
Mounting the Cut-Off Machine SYMBOLOGY battery before mounting WARNING Remove cut-off machine. Use only with MX Read operator's manual FUELTM Cut-Off Machines. 1. Unlatch and swing open the mounting cover . 2. Place machine onto mounting hook (1) and position machine trigger above the trigger lever pull on cart (2). Adjust rear alignment as needed (see "Rear Alignment Adjustment"). Always wear eye protection. Use appropriate hearing and respiratory protection. Regulatory Compliance mark (RCM).
2 Storage 1 Remove battery from machine and water from tank before storing. The push handle can be folded forward for compact storage. Repairs For repairs, return the cart to the nearest service center. ACCESSORIES only recommended accessoWARNING Use ries. Others may be hazardous. For a complete listing of accessories, go online to www.milwaukeetool.com.au / www.milwaukeetool.co.nz 5. Allow machine to come to full speed before con- or contact a distributor. tacting work surface.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy DutyTM. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.
