OPERATOR'S MANUAL Cat. No. MX LSCP WARNING To reduce the risk of injury, user must read and understand operator's manual.
•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. •Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. •If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
•Under abusive conditions, liquid may be ejected drain cleaning chemicals or other chemicals, etc. If from the battery; avoid contact. If contact ac- chemicals are present in the drain, it is important to cidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. work around those chemicals. Contact the chemical Liquid ejected from the battery may cause irritation manufacturer for required information. or burns.
SYMBOLOGY FUNCTIONAL DESCRIPTION No Load Revolutions per Minute (RPM) CAUTION 1 Risk of Electric Shock 2 14 Read operator's manual. 13 Always wear leather gloves over latex/rubber gloves. 12 11 Always wear eye protection. Use appropriate hearing and respiratory protection. 10 Two-person lift 9 8 Lift assist Drain cleaning 7 Ascend o 15 2 16 6 5 4 3 Descend 21 Forward/OFF/Reverse drum control 22 Regulatory Compliance Mark (RCM).
ASSEMBLY WARNING Recharge only with Cable Installation reduce the risk of injury, always WARNING To wear proper eye protection marked the charger - to comply with AS/NZS 1337.1. Always wear leather gloves over latex/rubber gloves to avoid entanglement. Cable tip may be sharp. Never feed more than 30 m (100') of cable into the machine to avoid overloading. Remove the cable for cleaning after each use. Different size and types of cables are available for different applications.
Transportation POWERTREDZ™ LIFT ASSIST Keep bystanders away when using the MX LSCP with POWERTREDZ™ LIFT ASSIST. Always clear the the machine. Machine is heavy. Lift with area of obstructions before use. Loss of control legs, not back. Keep tyres properly inflated at all times to main- could cause injury. Using Lift Assist is one person operation. tain control and stability. Do not use cart to transport other loads or add Use the POWERTREDZ™ Lift Assist to move the additional product.
9. When ascending or descending, pull up the 11. When descending, roll the wheels out past the edge to engage the treads. Pull up the incline incline and push the handle down into the and push the handle down into the surface. surface. Allow the Lift Assist to help move the Allow the Lift Assist to help move the machine. machine. Guide the treads using the transport Guide the treads using the transport handle. handle. Maintain downward pressure. Maintain downward pressure.
Using the Cable Feed OPERATION reduce the risk of injury, always WARNING To wear proper eye protection marked The cable feed can be used to assist in advancing and retrieving the cable. To use the cable feed: to comply with AS/NZS 1337.1 Always wear leather gloves over latex/rubber 1. Insert the battery pack. 2. Arm the machine. gloves to avoid entanglement. 3. Move the Forward/OFF/Reverse switch to Forward Arming the Machine . The MX FUEL™ Sewer Drum Machine must be 4.
NOTE: If more cable is needed to reach the clog, disconnect the original cable from the anchor cable. Then, either load additional cable into the machine and connect the two cables together, or connect the original cable to the cable in another machine. feed more than 30 m (100') of cable WARNING Never into the machine to avoid overloading. 6. When the clog is reached, disengage the auto feed. Manually move the cable in a back and forth motion until the obstruction is cleared.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold by authorised dealers in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE® prides itself in producing a premium quality product that is Nothing But Heavy DutyTM. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.
