OPERATOR'S MANUAL Cat. No. M18 ONESLDP M18™ SITE LIGHT/CHARGER WITH ONE-KEY™ WARNING To reduce the risk of injury, user must read and understand operator's manual.
packs. Use of any other battery packs may create a IMPORTANT SAFETY INSTRUCTIONS Read all safety warnand all instrucWARNING ings tions. Failure to follow When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
Recommended Ambient Charging Temperature ..................... 5°C to 40°C (40°F to 105°F) * Reduce AC Output Amps by 1.2A (276W) per additional light added in sequence. SERVICE Have using only identical replacement parts. This will ensure that the safety of the light is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorised service providers.
GROUNDING DANGER READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE. ASSEMBLY Recharge only with the charger WARNING - Improperly connecting the grounding wire can result in the risk of if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the tool. Never remove the grounding manual supplied with your charger and battery. prong from the plug. Do not use the tool if the Inserting/Removing the Batteries cord or plug is damaged.
Cold Weather Operation BATTERY OPERATION MILWAUKEE® Lithium-Ion battery packs are designed to operate in temperatures below freezing. When the battery pack is too cold, it may need to warm up before normal use. Put the battery on a tool and use the tool in a light application. It may “buzz” for a short time until it warms up. When the buzzing stops, use the tool normally. Fuel Gauge Use the Fuel Gauge to determine the battery pack's remaining run time. Press the Fuel Gauge button to display the lights.
MAINTENANCE reduce the risk of injury, always WARNING To unplug the tool and charger and RBRC Battery Recycling Seals The RBRC™ Battery Recycling Seals (see "Symbology") on your tool battery packs indicate that MILWAUKEE® has arranged for the recycling of that battery pack with the Rechargeable Battery Recycling Corporation (RBRC). At the end of your battery pack's useful life, return the battery pack to a MILWAUKEE® Branch Office/Service Centre or the participating retailer nearest you.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.