OPERATOR'S MANUAL Cat. No. M18ONEID-0 M18ONEIWF12-0 M18ONEIWP12-0 M18 FUEL™ 6 MM (1/4") HEX IMPACT DRIVER, & 13 MM (1/2") COMPACT IMPACT WRENCHES WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL SAFETY WARNINGS all safety warnings, instrucWARNING Read tions, illustrations and specifica- •Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. •Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. •Dress properly. Do not wear loose clothing or jewelry.
SYMBOLOGY •When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. •Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
ASSEMBLY OPERATION Recharge only with the charger reduce the risk of injury, wear WARNING specifi WARNING To ed for the battery. For spesafety goggles or glasses with side cific charging instructions, read the operator’s shields. manual supplied with your charger and battery. Using the Control Switch Inserting/Removing the Battery The control switch may be set to three positions: To remove the battery, push in the release buttons forward, reverse and lock.
The torque required to loosen a fastener averages ACCESSORIES 75% to 80% of the tightening torque, depending on Always remove battery pack before the condition of the contacting surfaces. WARNING changing or removing accessoOn light gasket jobs, run each fastener down to a relatively light torque and use a hand torque wrench ries. Only use accessories specifically recommended for this tool. Others may be hazardous. for final tightening. For a complete listing of accessories, go online to MAINTENANCE www.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.
