OPERATOR'S MANUAL Cat. No. M18 ONEFHIWF12, M18 ONEFHIWP12, M18 ONEFHIWF34 M18™ FUEL™ HIGH TORQUE IMPACT WRENCH WITH ONE-KEY™ WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instruc-- •Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. •Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. •Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
keys, nails, screws or other small metal objects, Corrosive or conductive fluids, such as seawater, that can make a connection from one terminal to certain industrial chemicals, and bleach or another. Shorting the battery terminals together may bleach-containing products, etc., can cause a short circuit. SYMBOLOGY •Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact acVolts tacts eyes, additionally seek medical help.
remove battery pack before WARNING Always changing or removing accessories. Mode To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place. 1 2 WARNING recommended for this tool. Others may be hazardous. cally designed for use on impact wrenches and drivers. Other sockets and accessories might shatter or break causing injury. 1 2 Attaching and Removing Accessories 1/2" Impact Wrench with Pin Detent RPM IPM Mode RPM Cat. No.
reduce the risk of personal inOil, dirt, rust or other matter on the threads or under the WARNING To jury and damage, never immerse head of the fastener affects the degree of tightness. The torque required to loosen a fastener averages your tool, battery pack or charger in liquid or 75% to 80% of the tightening torque, depending on the condition of the contacting surfaces. Cleaning On light gasket jobs, run each fastener down to a Clean dust and debris from vents.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.