OPERATOR'S MANUAL Cat. No. M18 FSX M18™ FUEL™ HP SAWZALL® RECIPROCATING SAW WARNING To reduce the risk of injury, user must read and understand operator's manual.
attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Do not use a battery pack or tool that is damaged or modi¿ed. Damaged or modi¿ed batteries may exhibit unpredictable behavior resulting in ¿re, explosion or risk of injury. Do not expose a battery pack or tool to ¿re or excessive temperature.
Installing and Removing Blades from the QUIK-LOK® Blade Clamp Remove battery pack before changing blades. Make sure the spindle and blade clamp areas are clean. Metal chips and sawdust may prevent the Quik-Lok® Blade Clamp from clamping securely. 1. Depending on the job, the blade may be Collar inserted with the teeth facing up or down. To install a blade, twist collar in the direction of the arrow while inserting Blade the blade into the clamp until the tang butts against the collar. 2.
The amount of orbital action may be adjusted by moving the orbital control switch to any position between the two symbols. For larger orbital action, move the orbit control switch closer to the orbital cut symbol . For smaller orbital action, move the orbit control switch closer to the straight cut symbol . Orbital action may be adjusted when the tool is running. NOTE: Orbital action will not operate if the blade is installed upside down.
ACCESSORIES Use only recommended accessoWARNING ries. Others may be hazardous. For a complete listing of accessories, go online to www.milwaukeetools.com.au/ www.milwaukeetools.co.nz or contact a distributor.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.