OPERATOR'S MANUAL Cat. No. M18 FPT2 M18 FUEL™ PIPE THREADER WARNING To reduce the risk of injury, user must read and understand operator's manual.
•Do not use the power tool if the switch does not Any power tool that cannot be controlled with the switch is dangerous and must be repaired. •Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
SERVICE Safety alert symbol repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. •Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorised service providers. Read operator's manual Do not wear gloves Always use support arm SPECIFIC SAFETY RULES FOR PIPE THREADER Keep hands away from moving parts •Always use the support device provided with the tool.
ASSEMBLY WARNING Recharge only with OPERATION reduce the risk of injury, always WARNING To wear proper eye protection marked the charger - to comply with ANSI Z87.1. manual supplied with your charger and battery. Resisting Threading Forces Removing/Inserting the Battery Always use the support device provided with the tool. The support arm clamps to the pipe and helps to resist the threading forces. WARNING! Loss of control during operation can result in personal injury. 1.
centre position. The trigger will not work while the Inspecting Threads/Using a Ring Gauge control switch is in the centre locked position. Always 1. Wipe any oil, chips or debris from the thread. lock the trigger or remove the battery pack before 2. Inspect the thread. Threads should be smooth, performing maintenance, changing accessories, complete, and in good form. If irregularities such storing the tool and any time the tool is not in use.
3. Remove the old battery, keep it away from children, and dispose of it properly. 4. Insert the new battery (3V CR2032), with the positive side facing up. 5. Close the battery door and tighten the screw securely. reduce the risk of personal inWARNING To jury and damage, never immerse your tool, battery pack or charger in liquid or Repairs For repairs, return the tool, battery pack and charger to the nearest service centre. ACCESSORIES only recommended accessoWARNING Use ries. Others may be hazardous.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.