Operator's Manual

ManualsBrandsMilwaukee ManualsImpact WrenchesM18 FUEL™ 1/2" Mid-Torque Impact Wrench with Friction Ring (Tool Only)

OPERATOR'S MANUAL

Cat. No.

M18 FMTIW2F12, M18 FMTIW2P12

M18 FUEL™ MID-TORQUE IMPACT WRENCHES

WARNING

To reduce the risk of injury, user must read and understand operator's manual.

Cat. No.:

M18 FMTIW2F12

Cat. No.:

M18 FMTIW2P12

Summary of content (8 pages)

PAGE 1
OPERATOR'S MANUAL Cat. No.: M18 FMTIW2F12 Cat. No.: M18 FMTIW2P12 Cat. No. M18 FMTIW2F12, M18 FMTIW2P12 M18 FUEL™ MID-TORQUE IMPACT WRENCHES WARNING To reduce the risk of injury, user must read and understand operator's manual.
PAGE 2
PAGE 3
•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. • Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. •If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
PAGE 4
•Under abusive conditions, liquid may be ejected • Maintain labels and nameplates. These carry from the battery; avoid contact. If contact acciden- important information. If ®unreadable or missing, contact a MILWAUKEE service facility for a eyes, additionally seek medical help. Liquid replacement. ejected from the battery may cause irritation or burns.
PAGE 5
FUNCTIONAL DESCRIPTION 1/2" Friction Ring (Cat. No.M18 FMTIW2F12) 1. Use only the appropriate size Square Drive Sockets. 2. To attach a socket, align the accessory with the 1 7 2 the anvil. OPERATION 3 4 reduce the risk of injury, always WARNING To wear proper eye protection marked to comply with AS/NZS 1337.1. When working in dusty situations, wear appropriate respiratory protection or use a suitable dust extraction solution.
PAGE 6
Using the Control Switch MAINTENANCE reduce the risk of injury, always WARNING To unplug the charger and remove the The control switch may be set to three positions: forward, reverse and lock. Due to a lockout mechanism, the control switch can only be adjusted when the ON/OFF switch is not pressed. Always allow the motor to come to a complete stop before using the control switch. 1. For forward (clockwise) rotation, push the control switch in the direction shown.
PAGE 7
PAGE 8
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold by authorised dealers in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE® prides itself in producing a premium quality product that is Nothing But Heavy DutyTM.