OPERATOR'S MANUAL Cat. No. M18 FMDP M18™ FUEL™ 38mm MAGNETIC DRILLS WARNING To reduce the risk of injury, user must read and understand operator's manual.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
When battery pack is not in use, keep it away Always use common sense and be cautious from other metal objects, like paper clips, coins, when using tools. It is not possible to anticipate keys, nails, screws or other small metal objects, every situation that could result in a dangerous that can make a connection from one terminal outcome. Do not use this tool if you do not to another.
ASSEMBLY WARNING Recharge only with FUNCTIONAL DESCRIPTION 2 1 the charger - manual supplied with your charger and battery. Removing/Inserting the Battery 3 To remove the battery, push in the release buttons and pull the battery pack away from the tool. remove battery pack before WARNING Always changing or removing accessories. To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place. 4 WARNING recommended for this tool. Others may be hazardous.
NOTE: Do not remove cutter unless slug is WARNING head or any other position thatremoved. Slug may eject unexpectedly. Avoid contact with cutter tips. Periodically inspect the cutter tips for loose or damaged tips. closure. NOTE: If the cutter does not release from the arbor 6. Insert battery pack. when the collar is turned, use a locking pliers to 7. With the ON(I) / OFF(O) switch in the OFF(O) the collar securely in one hand, rotate the pliers clockwise to release the cutter from the arbor.
14. The centre pin is spring loaded. Provide protection from ejected slug for people and property below cutting area. 15. Firmly grip the tool and rotate the magnet knob to disengaging the magnet. MAINTENANCE reduce the risk of injury, always WARNING To unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the tool, battery pack or charger. Contact a MILWAUKEE® service facility for ALL repairs.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. AUSTRALIA AND NEW ZEALAND MILWAUKEE ® Service MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.
