M18 FTS210 Original instructions
M18 FTS210 Original instructions Originalbetriebsanleitung Notice originale Istruzioni originali Manual original Manual original Oorspronkelijke gebruiksaanwijzing Original brugsanvisning Original bruksanvisning Bruksanvisning i original Alkuperäiset ohjeet Algupärane kasutusjuhend Πρωτότυπο οδηγιών χρήσης Оригинальное руководство по эксплуатации Orijinal işletme talimatı Původním návodem k používání Оригинално ръководство за експлоатация Pôvodný návod na použitie Instrucţiuni de folosire originale Instruk
I II III IV V VI VII VIII IX X XI XII XIII XIV XV XVI Technical Data,Safety Instructions, Specified Conditions of Use, Declaration of Conformity, Batteries, Maintenance, Symbols Please read and save these instructions!
>20 kg (44 lbs) I 4x 28 mm Not included in standard equipment.
I 3
1. II 2. 4 3.
EN 847-1 4. 5. II 1 2 6. 7. 1 2 8.
3-8 mm 9. 8. II 2 1 10. 6 11.
0° max. 44 mm max.
III Adjust the cutting depth to the thickness of the workpiece. The sawtooth should come out of the workpiece less than a full tooth height.
1.
-3° – 0° IV 4 mm 0° -3° 45° – 47° 4 mm 45° 47° 10
1. 2. V 3.
V A B A max.
B V max. 525 mm 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 C max.
1. V 2. 14 3.
4A V 4B 6-19 mm 15
4C V 16 < 6 mm
1. 2. VI 3. 4.
1. VII 2.
VIII Carry out a test cut 19
VIII 305 mm 63 mm 31,5 mm 19 mm 20 3 mm 6 mm 100 mm 70°
VIII 21
VIII 22
VIII 23
3-8 mm 1. 2. IX < > 3.
1. IX 2. 3.
1. 2. 1. 2.
78-100 % TIP X 55-77 % 33-54 % 10-32 % <10 % 27
Start XI Stop 28
XI 1. 2.
3. 10min XI 4.
1. XI 2. 3. 4.
1. 4 mm XI 2. 3.
1. 2. 2 XII 1 3. 4.
EN 847-1 4. 5. 1 XII 2 6. 34 7.
0° / 90° XIII 89.30 90.
90° XIII 89.30 36 90.
1. 2. 3. 4 mm 4 mm XIII ≠ = 4 5 6 7 8 9 10 11 12 13 14 15 0 16 1 17 2 18 3 19 4 20 5 21 6 7 8 9 10 11 12 13 14 150 161 172 183 194 205 216 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 8 9 10 11 12 13 14 15 16 17 18 19 4 20 5 21 6 22 7 23 8 24 9 25 10 11 12 13 14 15 16 17 18 194 205 216 227 238 249 25 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 4.
2,5 mm XIII 38
≠ = XIII 5 mm 39
XIII 90.00 89.
1. XIV 2. 3.
XV 42
TECHNICAL DATA Circular table saw Production code M18 FTS210 Battery voltage No-load speed Frequency band Radio-frequency power Saw blade dia. x hole dia Saw blade body thickness Tooth thickness Max. Cutting depth at 0 / 45° Distance between rip fence and saw blade max. Left Right Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 Ah ... 12,0 Ah) Recommended Ambient Operating Temperature Recommended battery types Recommended charger Noise information Measured values determined according to EN 62841.
d) When ripping, always apply the workpiece feeding force between the fence and the saw blade. Use a push stick when the distance between the fence and the saw blade is less than 150 mm, and use a push block when this distance is less than 50 mm. “Work helping” devices will keep your hand at a safe distance from the saw blade. SAFETY INSTRUCTIONS FOR TABLE SAWS e) Use only the push stick provided by the manufacturer or constructed in accordance with the instructions.
d) Align the fence to be parallel with the saw blade. A misaligned fence will pinch the workpiece against the saw blade and create kickback. e) Use a featherboard to guide the workpiece against the table and fence when making non-through cuts such as rabbeting. A featherboard helps to control the workpiece in the event of a kickback. f) Use extra caution when making a cut into blind areas of assembled workpieces. The protruding saw blade may cut objects that can cause kickback.
chemicals, and bleach or bleach containing products, etc., Can cause a short circuit. Use only System M18 chargers for charging System M18 battery packs. Do not use battery packs from other systems. Never break open battery packs and chargers and store only in dry rooms. Keep dry at all times. WARNING This device contains a button-type/coin cell lithium battery. A new or used battery can cause severe internal burns and lead to death in as little as 2 hours if swallowed or if it enters the body.
EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that the product described under “Technical Data” fulfills all the relevant provisions of the directives 2011/65/EU (RoHS) 2006/42/EC 2014/53/EU and the following harmonized standards have been used. EN 62841-1:2015 EN 62841-3-1:2014+AC:2015+A11:2017 EN 62479:2010 EN 55014-1:2017+A11:2020 EN 55014-2:2015 EN IEC 63000:2018 EN 301 489-1 V2.2.3 EN 301 489-17 V3.1.1 EN 300 328 V2.2.
Copyright 2021 Techtronic Industries GmbH Max-Eyth-Straße 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (01.