M18 FSAG115XB Original instructions
9 16 12 4 13 15 START STOP M18 FSAG125XB M18 FSAGV125XB 7 6 8 11 2 3
17. Abbildungen - Kapazitätsanzeige Milwaukee 1 M4 M12 M14 M18 M28 Remove the battery pack before starting any work on the machine.
1 2 1 2 3 6 click 7
0° 1 30° 2 60° 3 1 2 click 8 9
4 1 5a 2 5b 3 click 10 11
12 1 1 2 2 13
START 2 1 STOP 1 Insulated gripping surface 2 14 15
TECHNICAL DATA Type Production code Battery voltage Rated speed Thread of work spindle D=Grinding disc diameter max. d=Grinding disc hole diameter b=Grinding disc thickness max. b=Cutting disc thickness max. / min. < 30° M18 FSAG115XB Cordless Angle Grinder 4811 85 01 XXXXXX MJJJJ 18 V ⎓ 8500 min-1 M14 115 mm 22,2 mm 6 mm 3 mm / 1 mm D=Sanding disc diameter max. 115 mm D=Wiring brush diameter max. 75 mm Weight according EPTA-Procedure 01/2014 2,4 ... 3,4 kg (Li-Ion 2,0 Ah ...
g) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory. After inspecting and installing an accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute.
WORKING INSTRUCTIONS For accessories intended to be fitted with threaded hole wheel, ensure that the thread in the wheel is long enough to accept the spindle length. Always use and store the cutting and grinding wheels according to the manufacturer's instructions. Always use the correct guard for cutting and grinding. The grinding surface of the centre depressed wheels must be mounted min. 2 mm below the plane of the guard lip. The adjusting nut must be tightened before starting to work with the machine.
EC-DECLARATION OF CONFORMITY We declare as the manufacturer under our sole responsibility that the product described under “Technical Data” fulfills all the listed below relevant regulations and directives and that the following harmonized standards have been used.
Copyright 2021 Techtronic Industries GmbH Max-Eyth-Straße 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (02.