M18 FN18GS Original instructions
12 14 STOP 10 8 6 4 STOP 15 11 9 20 2 Text section with Technical Data, important Safety and Working Hints and description of Symbols 3
1 Remove the battery pack before starting any work on the machine.
3 1 click 2 1 2 6 7
Switching on-off Press and hold the power button for 2 seconds. 2 sec Low Battery LED If the red light will on, the battery is low. The tool will not be able to fire nails. To continue work, charge the battery.
1 2 9 sec 10 11
1 1 Single Sequential Actuation Contact (Bump) Actuation Switch to Contact Actuation: Press MODE Button - LED will light. Switch to single sequential actiation: Press MODE Button - LED will light. 2 2 Pull and hold the trigger Push the tool against the work surface, compressing the workpiece contact. 3 3 Push the tool against the work surface, compressing the workpiece contact to drive the fastener. Pull the trigger to drive the fastener.
1 1 Clearing a jammed Fastener 2 2 3 14 15
TECHNICAL DATA CORDLESS NAILER M18 FN18GS Production code............................................................................................... .........4741 26 02 ...000001-999999 Collation angle ................................................................................................. ................. 0 ° Fastener type: brad Diameter....................................................................................................... .............. 1,2 mm Length min./max..............
• Ensure that battery pack is secured against movement within packaging. • Do not transport batteries that are cracked or leak. Check with forwarding company for further advice OPERATION There are two ways for working with this nailer (see also picture section): Single Sequential Actuation: Drive the fastener by pulling the trigger. Contact (Bump) Actuation: Hold the trigger and drive the fastener by pushing the nailer against the workpiece.
Copyright 2020 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (10.
