M18 FCHS M18 FCHSC Original instructions
M18 FCHS M18 FCHSC Original instructions Originalbetriebsanleitung Notice originale Istruzioni originali Manual original Manual original Oorspronkelijke gebruiksaanwijzing Original brugsanvisning Original bruksanvisning Bruksanvisning i original Alkuperäiset ohjeet Algupärane kasutusjuhend Πρωτότυπο οδηγιών χρήσης Оригинальное руководство по эксплуатации Orijinal işletme talimatı Původním návodem k používání Оригинално ръководство за експлоатация Pôvodný návod na použitie Instrucţiuni de folosire originale
I II III IV V VI VII VIII IX Technical Data,Safety Instructions, Specified Conditions of Use, Declaration of Conformity, Batteries, Maintenance, Symbols Please read and save these instructions!
1 3 4 2 6 5 7 8 9 10 11 12 13 14 15 16 2 17 18
1. 2. I 1. 2.
78-100 % I 55-77 % 33-54 % 10-32 % <10 % 4
64 1394 : NP PAS 1. II 2. 3. 2 1 2 4.
PAS III 1. 2. + 3. 4. 6 - 3 mm 5.
1. 2. 10 min 3. IV 4.
V Insulated gripping surface 8
Start V 1 2 3 4 Carry out a test cut 9
Stop 2 V 1 3 4 10
1. 2.
VI 1/3 2 2/3 1 1 12 2/3 2 1/3
VI 1 2 3 13
VI 2 1 min 50 mm 2 1 45° 1/3 14 3 2/3
1. 2. VII 3.
94 : NP PAS 1. 1 VIII 2 2. 3.
94 : NP PAS 4. VIII 5. A 5.
TECHNICAL DATA Chain saw Production code IX M18 FCHS M18 FCHSC 4678 37 02 ... ... 000001-999999 12,4 m/s 16“ (406,4 mm) 380 mm 18 V 5,3 ... 6,4 kg -18°C ... +50°C M18B, M18HB12 M12-18, M1418 C6 200 ml 4743 51 02 ... ... 000001-999999 12,4 m/s 12“ (304,8 mm) 280 mm 18 V 5,2 ... 6,3 kg -18°C ... +50°C M18B, M18HB12 M12-18, M1418 C6 200 ml No-load chain speed Bar length max. Usable cutting length Battery voltage Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 Ah ...
Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you or pull you off balance. Carry the chain saw by the front handle with the chain saw switched off and away from your body. When transporting or storing the chain saw, always fit the guide bar cover. Proper handling of the chain saw will reduce the likelihood of accidental contact with the moving saw chain.
Remove the battery pack before starting any work on the appliance. WARNING! To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., Can cause a short circuit. Use only System M18 chargers for charging System M18 battery packs.
KNOW YOUR CHAIN SAW 1 2 3 4 5 6 7 8 9 Trigger Release Throttle Trigger Chain Drive Bar Groove Rear Handle Battery Front handle Front handle / Chain Brake Chain Lubricant Cap 10 11 12 13 14 15 16 17 18 Saw Chain Guide Bar Guide Bar Cover Front handle / Chain Brake Bar Mounting Nuts Spiked Bumper Combination Wrench Chain Catcher Chain Tension Screw WARNING! Consequences of improper maintenance, removal or modification of safety features like the chain brake, ignition switch, hand guard (front and back), s
Removing buttress roots A buttress root is a large root extending from the trunk of the tree above the ground. Remove large buttress roots prior to felling. Make the horizontal cut into the buttress first, followed by the vertical cut. Remove the resulting loose section from the work area. Follow the correct tree felling procedure after you have removed the large buttress roots. Limbing a tree Limbing is removing the branches from a fallen tree.
RISK REDUCTION • It has been reported that vibrations from handheld tools may contribute to a condition called Raynaud’s Syndrome in certain individuals. Symptoms may include tingling, numbness, and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought to contribute to the development of these symptoms.
Note It is recommended to use a vegetable based chain oil when pruning trees. Mineral oil may harm trees. Never use waste oil automotive oil, or very thick oils. These could damage the chain saw.Clear surface around the oil cap to prevent contamination. 1. Unscrew and remove the cap from the oil tank. 2. Pour the oil into the oil tank and monitor the oil level gauge. 3. Put the oil cap back on and tighten it up. Wipe away any spillage.
Maintenance schedule Daily check Bar lubrication Chain tension Chain sharpness For damaged parts For loose fasteners Chain brake function Guide Bar Complete saw Chain Brake Before each use Before each use and frequently Before each use, visual check Before each use Before each use Before each useInspect and clean Before each use After each use Every 5 hours of operation Replacement parts (Bar and chain) Manufacturer MILWAUKEE OREGON Chain 4932464873 90PX056G Guide Bar 4931469379 MLEA041 Chain must be fitt
GB-DECLARATION OF CONFORMITY We declare as the manufacturer under our sole responsibility that the product described under „Technical Data“ fulfills all the relevant provisions of the following Regulations S.I. 2012/3032 (as amended), S.I. 2008/1597 (as amended), S.I. 2016/1091 (as amended) and that the following designated standards have been used: SYMBOLS CAUTION! WARNING! DANGER! Remove the battery pack before starting any work on the appliance.
Copyright 2020 Techtronic Industries GmbH Max-Eyth-Straße 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (11.
