OPERATOR'S MANUAL Cat. No. M12 CPL M12™ CROSS LINE & PLUMB POINTS LASER WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL SAFETY WARNINGS Read and understand all instrucWARNING tions. Failure to follow all instructions SPECIFIC SAFETY RULES FOR LASER LEVELS • Do not dispose of tool or batteries with household waste material! Tool and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. •Ensure tool magnets are securely mounted to a metal surface.
FUNCTIONAL DESCRIPTION 1. Laser apertures 2. Laser mode indicator 3. 4. Pivot Bracket 1 SYMBOLOGY 5. Micro adjust 6. Fuel gauge 7. Mode button Volts Direct Current 2 /$6(5 5$',ATION DO NOT ST$5( ,1TO BEAM &/$66 /$6(5 352'8&7 1 1 Magnets 3 4 5HDG RSHUDWRU¶V PDQXDO 1 7 6 5HJXODWRU\ &RPSOLDQFH 0DUN 5&0 7KLV SURGXFW PHHWV applicable regulatory requirements. 5 Do not dispose of electric tools together with household waste material.
Fuel Gauge ON To determine the amount of charge left in the battery, turn the tool ON. LEDs 4 LEDs 3 LEDs 2 LEDs 1 LED 4 times & tool will not run ON Description 66-100% Battery charge 45-65% Battery charge 18-44% Battery charge 8-17% Battery charge Turns ON the laser and unlocks the pendulum to enable self-leveling. Turns ON the laser but does not unlock the pendulum (self leveling is disabled). The to indicate that the projected lines are not level or plumb.
ACCURACY FIELD CHECK the Accuracy Field Check NOTICE Perform procedure immediately upon unboxing of each new Laser Level and before exposure to jobsite conditions. See "Accuracy Field Check" for information. Should any deviation from listed product accuracy be found, please contact a MILWAUKEE® service facility. Failure to do so could result in rejection of warranty claim. Ambient temperature gradients can impact laser accuracy.
Horizontal Leveling Accuracy A free measuring space of approximately 10m x 10m on a firm surface between two walls or structures A and B is required for the check. It is also suggested to mount the Laser Level to a Tripod for easy adjustment. Securely mount the tool on one side of the room and centered between walls A and B. Direct the laser lines toward the other side of the room such that the horizontal line appears on both walls A and B. Allow the laser to Self-Level. 1.
4. Rotate the tool 180°. Align the centre point of the 5. Mark the centre of the top plumb point on the reference line on the ceiling (point III). d d 9. The maximum vertical deviation (d) is: d max = 2X H (door opening) x ±3.18mm ÷ 10m Example: for a door opening height of 2.05m, the 6. The distance between points I and III on the maximum permitted deviation (d) is: ceiling is the deviation (d) of the tool. This dmax = 2 x 2.05m x ±3.18mm ÷ 10m = ±1.3 mm distance should not exceed 3.18mm (max.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold by authorised dealers in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE® prides itself in producing a premium quality product that is Nothing But Heavy DutyTM. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.