M12 SI Original instructions
5 8 9 10 4 6 7 ON OFF 12 2 Text section with Technical Data, important Safety and Working Hints and description of Symbols 3
1 Remove the battery pack before starting any work on the machine.
ON 2 2 1 1 OFF 6 7
Blinking Green -> Heating Continuous Green -> Solder melt temperature (200-400°C) Continuous Red -> Cooling 8 9
1 2 3 10 11
TECHNICAL DATA SOLDERING IRON M12 SI Average Heater Power (max) ................................................. ...........................90 W Set Tip Temperature ............................................................... .........................400 °C Warm up time ......................................................................... ...........................18 s Battery voltage........................................................................ ...........................
14 15
Copyright 2020 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (10.
