M12 FPDX Original instructions
18 17 16 2 1 20 Text section with Technical Data, important Safety and Working Hints and description of Symbols 19 611 5 15 12 13 STOP 14 2 START 4 3
1 2 2 sec Remove the battery pack before starting any work on the machine.
The overview shows a selection of different application heads to this Milwaukee powerbase. Depending on the equipment package you have purchased various application heads. Other application heads and powerbases can be purchased separately. Use only the imaged application combinations of application heads.
1 max 25 mm Bit 2 1 8 9
1 2 1 10 11
1 2 START Handle (insulated gripping surface) 1 STOP 2 12 13
LOCK 14 15
16 17
1 2 18 19
TECHNICAL DATACORDLESS PERCUSSION DRILL/DRIVER M12 FPDX Production code....................................................................... ..................... 4673 25 03... ...000001-999999 Drilling capacity in steel ........................................................... ...........................13 mm Drilling capacity in wood .......................................................... ...........................35 mm Drilling capacity in brick and tile ........................................
BATTERY PACK PROTECTION SYMBOLS In extremely high torque, binding, stalling and short circuit situations that cause high current draw, the tool will vibrate for about 2 seconds and then the tool will turn OFF. To reset, release the trigger. Under extreme circumstances, the internal temperatur of the battery could become to high. If this happens, the battery will shut down. Place the battery on the charger to charge and reset it.
Copyright 2020 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (10.
